Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
Radxa Rock Pi 4 vs. Boardcon EMH6 SBC vs. Technologic Systems TS-7970 Quad vs. Intrinsyc Open-Q 835 vs. FS Elektronik Systeme PicoCoreMX6SX vs. Sinovoip Banana Pi BPI-M64 vs. Xunlong Software Orange Pi Zero Plus H5 vs. MYIR Tech Rico board
Rock Pi 4 |
EMH6 SBC |
TS-7970 Quad |
Open-Q 835 |
PicoCoreMX6SX |
Banana Pi BPI-M64 |
Orange Pi Zero Plus H5 |
Rico board |
|
| Manufacturer | Radxa | Boardcon | Technologic Systems | Intrinsyc | FS Elektronik Systeme | Sinovoip | Xunlong Software | MYIR Tech |
| Price | $ 75.0 | - | $ 382.0 | $ 270.0 | - | - | $ 15.0 | $ 99.0 |
| SoC | Rockchip RK3399 | Allwinner H6 | NXP i.MX6 Solo | Qualcomm Snapdragon 835 | NXP i.MX 6SoloX | AllWinner A64 | AllWinner H5 | TI AM437X |
| CPU |
2× ARM Cortex-A72 @ 2.0 Ghz 4× ARM Cortex-A53 @ 1.5 Ghz |
4× ARM Cortex-A53 @ 1.8 Ghz | 4× ARM Cortex-A9 @ 1.0 Ghz | 8× Qualcomm Kryo 280 @ 2.2 Ghz | 1× ARM Cortex-A9 @ 800 Mhz | 4× ARM Cortex-A53 @ 1.2 Ghz | 4× ARM Cortex-A53 @ 1.2 Ghz | 1× ARM Cortex-A9 @ 1.02 Ghz |
| GPU | Mali-T860 MP4 | Mali T-720 | Vivante | Qualcomm Adreno 540 | 3D, 2D | Mali-400 MP2 | Mali-450 MP4 | PowerVR SGX530 |
| RAM | 4.0 GiB LPDDR4 | 1.0 GiB DDR3L | 2.0 GiB DDR3 | 4.0 GiB LPDDR4 | 1.0 GiB DDR3L | 2.0 GiB DDR3 | 1.0 GiB DDR3 | 1.0 GiB |
| eMMC | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered |
| USB |
4 × host ports 1 of which support USB-OTG |
2 × host ports 1 of which support USB-OTG |
4 × host ports 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
2 × host ports 1 of which support USB-OTG |
3 × host ports 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
| Ethernet |
1× 1 Gbps supports passive and active PoE
|
1× 10/100
|
1× 1 Gbps
|
1× 1 Gbps
|
1× 1 Gbps
|
1× 1 Gbps
|
1× 1 Gbps
|
|
| Wi-Fi |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
- |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
- |
| Bluetooth | onboard | onboard | onboard | onboard | - | onboard | - | - |
| Camera | up to 1 x inputs | - | - | up to 3 x inputs | - | - | - | - |
| Audio |
1 × outputs 1 × mic-in 1 × I2S |
1 × outputs 1 × line-in 1 × mic-in 1 × spdif-out |
1 × outputs 1 × mic-in |
- |
1 × outputs 1 × line-in 1 × mic-in 1 × spdif-out 1 × I2S |
1 × outputs 1 × I2S |
1 × outputs 1 × mic-in |
- |
| GPIO | 40 | 6 | 32 | 1 | - | 40 | 26 | - |
| PWM | 2 | - | - | - | 8 | 1 | 1 | - |
| ADC | 1 | - | 3 | - | - | - | - | 7 |
| I2C | 2 | - | 1 | 1 | 3 | 1 | 1 | 2 |
| SPI | 1 | - | 1 | 1 | 2 | 1 | 1 | 2 |
| UART | 2 | 1 | 4 | 1 | 5 | 1 | 2 | 4 |
| CAN | - | - | 2 | - | 2 | - | - | - |
| Pin header |
HAT (Raspberry Pi) |
- | - | - | - |
HAT (Raspberry Pi) |
HAT (Raspberry Pi) |
- |
| Dimensions | 85 mm x 54 mm x 20 mm | 140 mm x 100 mm | 122 mm x 112 mm | 50 mm x 25 mm x 5 mm | 35 mm x 40 mm | 92 mm x 60 mm x 15 mm | 45 mm x 48 mm x 13 mm | 100 mm x 65 mm x 5 mm |
| Temperature | 0.0°C - 80.0°C | - | -20.0°C - 70.0°C | -10.0°C - 70.0°C | 0.0°C - 70.0°C | - | - | 0.0°C - 70.0°C |
| Software |
Linux: True Android: 7.1, 9.0 |
Linux: True Android: 7.1 |
Linux: True Android: 7.1 |
Linux: True Android: 8 |
Linux: True Windows: WEC 2013 |
Linux: True Android: yes Windows: 10 IoT core |
Linux: True | Linux: True |