Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
Radxa Rock Pi S vs. Sinovoip Banana Pi BP1-M2 vs. Radxa Rock Pi E vs. Globalscale Technologies Mochabin-5G vs. FriendlyElec NanoPi M2A
Rock Pi S |
Banana Pi BP1-M2 |
Rock Pi E |
Mochabin-5G |
NanoPi M2A |
|
| Manufacturer | Radxa | Sinovoip | Radxa | Globalscale Technologies | FriendlyElec |
| Price | $ 14.0 | $ 59.0 | $ 24.0 | $ 110.0 | $ 30.0 |
| SoC | Rockchip RK3308 | AllWinner A31S | Rockchip RK3328 | Marvell Armada 7040 | Samsung S5P4418 |
| CPU | 4× ARM Cortex-A35 @ 1.3 Ghz | 4× ARM Cortex-A7 @ 1.0 Ghz | 4× ARM Cortex-A53 @ 1.3 Ghz | 4× ARM Cortex-A72 @ 1.4 Ghz | 4× ARM Cortex-A53 @ 1.4 Ghz |
| GPU | - | PowerVR SGX544MP2 | Mali-450MP4 | - | Mali-400 MP |
| RAM | 512.0 MiB DDR3 | 1.0 GiB DDR3 | 2.0 GiB DDR3 | 8.0 GiB DDR4 | 1.0 GiB |
| eMMC | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered |
| USB |
1 × host port 1 of which support USB-OTG |
4 × host ports 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
2 × host ports |
2 × host ports 1 of which support USB-OTG |
| Ethernet |
1× 10/100 supports passive and active PoE
|
1× 1 Gbps
|
1× 10 Gbps 6 ports are copper, 2 ports are SFP wake on lan supported supports passive and active PoE
|
1× 1 Gbps
|
|
| Wi-Fi |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac/ax |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n |
| Bluetooth | onboard | - | onboard | onboard | onboard |
| Modem | - | - | - | onboard | - |
| Camera | - | - | - | - | up to 1 x inputs |
| Audio |
1 × outputs 1 × line-in 1 × mic-in 1 × I2S |
1 × outputs |
1 × outputs 9 × spdif-out 1 × I2S |
- |
1 × outputs 1 × mic-in 1 × I2S |
| GPIO | 52 | 40 | 40 | 1 | 40 |
| PWM | 3 | - | 2 | - | 1 |
| ADC | 1 | - | 1 | - | - |
| I2C | 4 | - | 1 | - | 1 |
| SPI | 3 | - | 1 | - | 1 |
| UART | 3 | - | 2 | - | 2 |
| CAN | - | - | - | 1 | - |
| Pin header | - | - |
HAT (Raspberry Pi) |
- |
HAT (Raspberry Pi) |
| Form factor | - | - | - | Mini-ITX | - |
| Dimensions | 43 mm x 43 mm | - | 65 mm x 56 mm | 170 mm x 170 mm x 32 mm | 64 mm x 60 mm x 13 mm |
| Temperature | - | - | - | 0.0°C - 70.0°C | - |
| Software | Linux: True |
Linux: True Android: 4.4 |
Linux: True | Linux: True (mainline) |
Linux: True Android: 5.1 |