Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
Radxa Zero vs. Nvidia Jetson Nano Developer Kit vs. Raspberry Pi Foundation Raspberry Pi Compute Module 4 vs. Raspberry Pi Foundation Raspberry Pi 4 Model B vs. CubieTech CubieTruck Plus (Cubieboard 5) vs. SECO SBC-A62
Zero |
Jetson Nano Developer Kit |
Raspberry Pi Compute Module 4 |
Raspberry Pi 4 Model B |
CubieTruck Plus (Cubieboard 5) |
SBC-A62 |
|
| Manufacturer | Radxa | Nvidia | Raspberry Pi Foundation | Raspberry Pi Foundation | CubieTech | SECO |
| Price | $ 15.0 | $ 99.0 | $ 25.0 | $ 35.0 | $ 99.0 | - |
| SoC | Amlogic S905Y2 | Nvidia Erista | Broadcom BCM2711 | Broadcom BCM2711B0 | AllWinner H8 | NXP i.MX6 Solo, DualLite, or Quad |
| CPU | 4× ARM Cortex-A53 @ 1.8 Ghz | 4× ARM Cortex-A57 MPCore @ 1.43 Ghz | 4× ARM Cortex-A72 @ 1.5 Ghz | 4× ARM Cortex-A72 @ 1.5 Ghz | 8× ARM Cortex-A7 @ 2.0 Ghz | 4× ARM Cortex-A9 @ 1.0 Ghz |
| GPU | ARM Mali-G31 MP2 | Nvidia Maxwell with 128x CUDA cores | VideoCore VI | VideoCore VI | PowerVR SGX544 | Vivante |
| RAM | 4.0 GiB LPDDR4 | 4.0 GiB LPDDR4 | 8.0 GiB LPDDR4 | 8.0 GiB LPDDR4 @ 3200MHz | 2.0 GiB DDR3 | 1.0 GiB |
| eMMC | 1 × soldered | 1 × soldered | 1 × soldered | - | 1 × soldered | 1 × soldered |
| SD | - | - | - | 1 × bootable: True | - | - |
| USB |
1 × host port 1 of which are Type-C 1 of which support USB-OTG |
4 × host ports 1 of which support USB-OTG |
1 × host port |
5 × host ports 1 of which are Type-C |
1 × host port 1 of which support USB-OTG |
3 × host ports |
| Ethernet |
1× 1 Gbps
|
1× 1 Gbps
|
1× 1 Gbps supports passive and active PoE
|
1× 1 Gbps
|
1× 1 Gbps
|
|
| Wi-Fi |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
- |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n/ax 5Ghz a/n/ac/ax |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n |
- |
| Bluetooth | onboard | - | onboard | onboard | onboard | - |
| Camera | - | up to 1 x inputs | up to 2 x inputs | up to 1 x inputs | up to 2 x inputs | - |
| Audio |
1 × spdif-out 1 × I2S |
1 × I2S |
- |
1 × outputs 1 × I2S |
1 × outputs 1 × line-in 1 × mic-in 1 × spdif-out 1 × I2S |
1 × outputs 1 × mic-in |
| GPIO | 23 | 40 | 28 | 26 | 70 | 28 |
| PWM | 1 | - | - | 4 | 1 | 1 |
| ADC | 1 | - | - | - | 1 | - |
| I2C | 2 | 1 | 6 | 2 | 1 | - |
| SPI | 2 | 1 | 5 | 2 | 1 | - |
| UART | 1 | 1 | 6 | 1 | 1 | - |
| CAN | 1 | - | - | - | - | - |
| Pin header | - | - | - |
HAT (Raspberry Pi) |
- | - |
| Form factor | Raspberry Pi Zero | - | Raspberry Pi Compute Module 4 | Raspberry Pi | - | - |
| Dimensions | 66 mm x 30 mm | 100 mm x 80 mm x 29 mm | 55 mm x 40 mm | 85 mm x 56 mm x 20 mm | 110 mm x 80 mm x 14 mm | 110 mm x 87 mm x 41 mm |
| Temperature | - | - | 0.0°C - 80.0°C | 0.0°C - 50.0°C | - | - |
| Software |
Linux: True Android: 9 |
Linux: True | Linux: True (mainline) | Linux: True (mainline) |
Linux: True Android: 4.4 |
Linux: True Android: 6.0 |