Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
Radxa Zero vs. Raspberry Pi Foundation Raspberry Pi Compute Module 4 vs. CubieTech CubieTruck Plus (Cubieboard 5) vs. SECO SBC-A62 vs. Nvidia Jetson TX2
Zero |
Raspberry Pi Compute Module 4 |
CubieTruck Plus (Cubieboard 5) |
SBC-A62 |
Jetson TX2 |
|
| Manufacturer | Radxa | Raspberry Pi Foundation | CubieTech | SECO | Nvidia |
| Price | $ 15.0 | $ 25.0 | $ 99.0 | - | $ 549.0 |
| SoC | Amlogic S905Y2 | Broadcom BCM2711 | AllWinner H8 | NXP i.MX6 Solo, DualLite, or Quad | Nvidia Tegra X2 |
| CPU | 4× ARM Cortex-A53 @ 1.8 Ghz | 4× ARM Cortex-A72 @ 1.5 Ghz | 8× ARM Cortex-A7 @ 2.0 Ghz | 4× ARM Cortex-A9 @ 1.0 Ghz |
4× ARM Cortex-A57 @ 2.0 Ghz 2× Nvidia Denver 2 @ 2.0 Ghz |
| GPU | ARM Mali-G31 MP2 | VideoCore VI | PowerVR SGX544 | Vivante | Nvidia Pascal (256 cores, 1300MHz) |
| RAM | 4.0 GiB LPDDR4 | 8.0 GiB LPDDR4 | 2.0 GiB DDR3 | 1.0 GiB | 8.0 GiB LPDDR4 |
| eMMC | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered |
| USB |
1 × host port 1 of which are Type-C 1 of which support USB-OTG |
1 × host port |
1 × host port 1 of which support USB-OTG |
3 × host ports | 2 × host ports |
| Ethernet |
1× 1 Gbps
|
1× 1 Gbps
|
1× 1 Gbps
|
1× 1 Gbps
|
|
| Wi-Fi |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n |
- |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
| Bluetooth | onboard | onboard | onboard | - | onboard |
| Camera | - | up to 2 x inputs | up to 2 x inputs | - | up to 1 x inputs |
| Audio |
1 × spdif-out 1 × I2S |
- |
1 × outputs 1 × line-in 1 × mic-in 1 × spdif-out 1 × I2S |
1 × outputs 1 × mic-in |
1 × I2S |
| GPIO | 23 | 28 | 70 | 28 | 400 |
| PWM | 1 | - | 1 | 1 | - |
| ADC | 1 | - | 1 | - | - |
| I2C | 2 | 6 | 1 | - | 1 |
| SPI | 2 | 5 | 1 | - | 1 |
| UART | 1 | 6 | 1 | - | 1 |
| CAN | 1 | - | - | - | - |
| Form factor | Raspberry Pi Zero | Raspberry Pi Compute Module 4 | - | - | - |
| Dimensions | 66 mm x 30 mm | 55 mm x 40 mm | 110 mm x 80 mm x 14 mm | 110 mm x 87 mm x 41 mm | 50 mm x 87 mm x 6 mm |
| Temperature | - | 0.0°C - 80.0°C | - | - | - |
| Software |
Linux: True Android: 9 |
Linux: True (mainline) |
Linux: True Android: 4.4 |
Linux: True Android: 6.0 |
Linux: True |