Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
Raspberry Pi Foundation Raspberry Pi 5 vs. Lantronix Open-Q 610 microSOM vs. Merrii Technology Co., Ltd. Hummingbird H7 vs. FriendlyElec ZeroPi vs. Micro/Sys SBC1654
Raspberry Pi 5 |
Open-Q 610 microSOM |
Hummingbird H7 |
ZeroPi |
SBC1654 |
|
| Manufacturer | Raspberry Pi Foundation | Lantronix | Merrii Technology Co., Ltd. | FriendlyElec | Micro/Sys |
| Price | $ 60.0 | - | $ 90.0 | $ 13.0 | $ 698.0 |
| SoC | Broadcom BCM2712 | Qualcomm QCS610 | AllWinner H8 | AllWinner H3 | NXP i.MX515 |
| CPU | 4× ARM Cortex-A76 @ 2.4 Ghz | 2× Qualcomm Kryo 460 @ 2.2 Ghz | 8× ARM Cortex-A7 @ 2.0 Ghz | 4× ARM Cortex-A7 @ 1.2 Ghz | 1× ARM Cortex-A9 @ 800 Mhz |
| GPU | VideoCore VII | Qualcomm Adreno 612 | PowerVR SGX544 | Mali-400 MP2 | NEON, HW accelerated OpenGL ES 2.0 and OpenVG 1.1 |
| Onboard MCU | 1 x Raspberry Pi RP1 | - | - | - | - |
| RAM | 8.0 GiB LPDDR4 @ 4267MHz | 2.0 GiB LPDDR4 | 1.0 GiB DDR3 | 1.0 GiB DDR3 | 1.0 GiB |
| eMMC | - | 1 × soldered | 1 × soldered | - | 1 × soldered |
| SD | 1 × bootable: True | - | - | - | - |
| USB |
5 × host ports 1 × device port 1 of which are Type-C |
2 × host ports |
2 × host ports 1 of which support USB-OTG |
1 × host port |
3 × host ports 1 of which support USB-OTG |
| Ethernet |
1× 1 Gbps supports passive and active PoE
|
1× 1 Gbps
|
1× 10/100
|
1× 1 Gbps
|
1× 10/100
|
| Wi-Fi |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n/ax 5Ghz a/n/ac/ax |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
- | - |
| Bluetooth | onboard | onboard | onboard | - | - |
| Camera | up to 2 x inputs | up to 3 x inputs | up to 1 x inputs | - | - |
| Audio |
1 × outputs 1 × I2S |
1 × I2S |
1 × outputs 1 × mic-in |
- |
1 × outputs 1 × line-in 1 × mic-in |
| GPIO | 26 | 1 | 10 | - | - |
| PWM | 4 | - | - | - | 1 |
| I2C | 2 | 1 | - | - | - |
| SPI | 2 | 1 | - | - | - |
| UART | 1 | 1 | 2 | 1 | - |
| CAN | - | - | - | - | 2 |
| Pin header |
HAT (Raspberry Pi) |
- | - | - | - |
| Form factor | Raspberry Pi | - | - | - | - |
| Dimensions | 85 mm x 56 mm x 20 mm | 50 mm x 25 mm | 111 mm x 90 mm x 15 mm | 40 mm x 40 mm | 95 mm x 90 mm x 15 mm |
| Temperature | 0.0°C - 50.0°C | - | -30.0°C - 70.0°C | -20.0°C - 70.0°C | - |
| Software | Linux: True (mainline) |
Linux: True Android: 10 |
Linux: True Android: 4.4 |
Linux: True |
Linux: True Windows: CE |