Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
Raspberry Pi Foundation Raspberry Pi 5 vs. LattePanda LattePanda Delta 432 vs. Hardkernel ODROID-C1+ vs. 8devices Habanero vs. LattePanda LattePanda Alpha 800s
Raspberry Pi 5 |
LattePanda Delta 432 |
ODROID-C1+ |
Habanero |
LattePanda Alpha 800s |
|
| Manufacturer | Raspberry Pi Foundation | LattePanda | Hardkernel | 8devices | LattePanda |
| Price | $ 60.0 | $ 188.0 | $ 37.0 | $ 55.0 | $ 379.0 |
| SoC | Broadcom BCM2712 | Intel Celeron N4100 | Amlogic S805 | Qualcomm IPQ4019 | Intel Core M3-8100 |
| CPU | 4× ARM Cortex-A76 @ 2.4 Ghz | 4× Intel Gemini Lake @ 2.4 Ghz | 4× ARM Cortex-A5 @ 1.5 Ghz | 4× ARM Cortex-A7 @ 720 Mhz | 2× Intel x86_64 @ 3.4 Ghz |
| GPU | VideoCore VII | Intel HD Graphics 600 | Mali-450 MP2 | - | Intel HD Graphics 615 |
| Onboard MCU | 1 x Raspberry Pi RP1 | - | - | - | - |
| RAM | 8.0 GiB LPDDR4 @ 4267MHz | 4.0 GiB LPDDR4 | 1.0 GiB | 1.0 GiB DDR3L | 8.0 GiB DDR3L |
| eMMC | - | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered |
| SD | 1 × bootable: True | - | - | - | - |
| USB |
5 × host ports 1 × device port 1 of which are Type-C |
3 × host ports 1 of which support USB-OTG |
4 × host ports 1 of which support USB-OTG |
2 × host ports |
3 × host ports 1 of which support USB-OTG |
| Ethernet |
1× 1 Gbps supports passive and active PoE
|
1× 1 Gbps wake on lan supported
|
1× 1 Gbps
|
1× 1 Gbps
|
1× 1 Gbps wake on lan supported
|
| Wi-Fi |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n/ax 5Ghz a/n/ac/ax |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
- |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
| Bluetooth | onboard | onboard | - | - | onboard |
| Camera | up to 2 x inputs | - | - | - | - |
| Audio |
1 × outputs 1 × I2S |
1 × outputs 1 × I2S |
1 × I2S |
1 × I2S |
1 × outputs 1 × I2S |
| GPIO | 26 | 100 | 40 | 46 | 100 |
| PWM | 4 | - | 2 | 4 | - |
| ADC | - | - | 2 | - | - |
| I2C | 2 | 1 | 1 | 2 | 1 |
| SPI | 2 | 1 | 1 | 1 | 1 |
| UART | 1 | 1 | 2 | 2 | 1 |
| Pin header |
HAT (Raspberry Pi) |
Shield (Arduino) | - | - | Shield (Arduino) |
| Form factor | Raspberry Pi | - | - | - | - |
| Dimensions | 85 mm x 56 mm x 20 mm | 130 mm x 90 mm x 14 mm | 85 mm x 56 mm x 17 mm | 49 mm x 45 mm | 115 mm x 78 mm x 14 mm |
| Temperature | 0.0°C - 50.0°C | - | - | 0.0°C - 65.0°C | - |
| Software | Linux: True (mainline) |
Linux: True (mainline) Android: x86 Windows: 10 |
Linux: True Android: Android |
Linux: True |
Linux: True (mainline) Android: x86 Windows: 10 |