Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
Raspberry Pi Foundation Raspberry Pi Compute Module 3 vs. Radxa Rock Pi S vs. LeMaker Banana Pi vs. Beijing Widora Technology Co., Ltd. MQ-Quad vs. Boundary Devices Nitrogen8M vs. SolidRun HummingBoard Gate
Raspberry Pi Compute Module 3 |
Rock Pi S |
Banana Pi |
MQ-Quad |
Nitrogen8M |
HummingBoard Gate |
|
| Manufacturer | Raspberry Pi Foundation | Radxa | LeMaker | Beijing Widora Technology Co., Ltd. | Boundary Devices | SolidRun |
| Price | $ 30.0 | $ 14.0 | $ 57.0 | $ 25.0 | $ 180.0 | $ 96.0 |
| SoC | Broadcom BCM2837 | Rockchip RK3308 | AllWinner A20 | Allwinner H616 | NXP i.MX 8M Dual/QuadLite/Quad | NXP i.MX6 Solo/DualLite/Dual/Quad |
| CPU | 4× ARM Cortex-A53 @ 1.2 Ghz | 4× ARM Cortex-A35 @ 1.3 Ghz | 2× ARM Cortex-A7 @ 1.0 Ghz | 4× ARM Cortex-A53 @ 1.5 Ghz | 4× ARM Cortex-A53 @ 1.5 Ghz | 4× ARM Cortex-A9 @ 1.2 Ghz |
| GPU | VideoCore IV | - | Mali-400 MP2 | Mali G31 MP2 | Vivante GC7000Lite | Vivante GC880/GC2000 |
| RAM | 1.0 GiB DDR3 | 512.0 MiB DDR3 | 1.0 GiB DDR3 | 1.0 GiB DDR3L | 4.0 GiB LPDDR4 | |
| eMMC | 1 × soldered | 1 × soldered | 1 × soldered | - | 1 × soldered | 1 × soldered |
| SD | - | - | - | 1 × bootable: True | - | - |
| USB |
1 × host port 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
2 × host ports 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
3 × host ports 1 of which support USB-OTG |
4 × host ports |
| Ethernet |
1× 10/100 supports passive and active PoE
|
1× 1 Gbps
|
1× 10/100
|
1× 1 Gbps
|
1× 1 Gbps
|
|
| Wi-Fi | - |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n |
- |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
On-board Wi-Fi without external antenna |
| Bluetooth | - | onboard | - | onboard | onboard | onboard |
| Camera | up to 2 x inputs | - | - | - | up to 2 x inputs | up to 1 x inputs |
| Audio | - |
1 × outputs 1 × line-in 1 × mic-in 1 × I2S |
1 × outputs |
1 × outputs 2 × I2S |
1 × outputs 1 × mic-in |
1 × outputs 1 × mic-in 1 × spdif-out |
| GPIO | 48 | 52 | 26 | 25 | - | 36 |
| PWM | 2 | 3 | - | 4 | - | - |
| ADC | - | 1 | - | - | - | - |
| I2C | 2 | 4 | - | 1 | 3 | 1 |
| SPI | 2 | 3 | - | 1 | 1 | - |
| UART | 2 | 3 | - | 2 | 2 | 1 |
| Pin header |
HAT (Raspberry Pi) |
- | - |
HAT (Raspberry Pi) |
- | - |
| Form factor | Raspberry Pi Compute Module 3 | - | - | Raspberry Pi Zero | - | - |
| Dimensions | 69 mm x 31 mm x 4 mm | 43 mm x 43 mm | - | 65 mm x 30 mm | - | 102 mm x 69 mm x 20 mm |
| Temperature | -25.0°C - 80.0°C | - | - | - | -40.0°C - 85.0°C | 0.0°C - 40.0°C |
| Software |
Linux: True (mainline) Windows: 10 IoT core |
Linux: True |
Linux: True Android: 4.2 |
Linux: True Android: 10 |
Linux: True Android: 10.0, 11.0, 12.0 |
Linux: True |