Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
Raspberry Pi Foundation Raspberry Pi Compute Module 3 vs. Radxa Rock Pi S vs. Next Thing Co. CHIP Pro vs. Radxa Rock Pi E vs. Zepan LicheePi One vs. Technical Solutions Inc. TSCM 283
Raspberry Pi Compute Module 3 |
Rock Pi S |
CHIP Pro |
Rock Pi E |
LicheePi One |
TSCM 283 |
|
| Manufacturer | Raspberry Pi Foundation | Radxa | Next Thing Co. | Radxa | Zepan | Technical Solutions Inc. |
| Price | $ 30.0 | $ 14.0 | $ 16.0 | $ 24.0 | $ 6.0 | $ 59.0 |
| SoC | Broadcom BCM2837 | Rockchip RK3308 | AllWinner R8 (Next Thing GR8) | Rockchip RK3328 | AllWinner A13 | NXP i.MX283 |
| CPU | 4× ARM Cortex-A53 @ 1.2 Ghz | 4× ARM Cortex-A35 @ 1.3 Ghz | 1× ARM Cortex-A8 @ 1.0 Ghz | 4× ARM Cortex-A53 @ 1.3 Ghz | 1× ARM Cortex-A8 @ 1.0 Ghz | 1× ARM926ejs @ 450 Mhz |
| GPU | VideoCore IV | - | Mali-400 | Mali-450MP4 | Mali 400 | - |
| RAM | 1.0 GiB DDR3 | 512.0 MiB DDR3 | - | 2.0 GiB DDR3 | 1.0 GiB DDR3 | - |
| eMMC | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered |
| USB |
1 × host port 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
2 × host ports 1 of which support USB-OTG |
| Ethernet |
1× 10/100 supports passive and active PoE
|
1× 10/100 wake on lan supported
|
||||
| Wi-Fi | - |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
On-board Wi-Fi without external antenna | - |
| Bluetooth | - | onboard | onboard | onboard | onboard | - |
| Camera | up to 2 x inputs | - | up to 1 x inputs | - | up to 1 x inputs | - |
| Audio | - |
1 × outputs 1 × line-in 1 × mic-in 1 × I2S |
1 × outputs 2 × mic-in 1 × spdif-out 1 × I2S |
1 × outputs 9 × spdif-out 1 × I2S |
1 × outputs |
2 × outputs 2 × line-in 1 × mic-in 1 × I2S |
| GPIO | 48 | 52 | 32 | 40 | 9 | 8 |
| PWM | 2 | 3 | 2 | 2 | - | - |
| ADC | - | 1 | - | 1 | - | 2 |
| I2C | 2 | 4 | 1 | 1 | 3 | 2 |
| SPI | 2 | 3 | 1 | 1 | 3 | 1 |
| UART | 2 | 3 | 2 | 2 | 3 | 2 |
| Pin header |
HAT (Raspberry Pi) |
- | - |
HAT (Raspberry Pi) |
- | - |
| Form factor | Raspberry Pi Compute Module 3 | - | - | - | - | - |
| Dimensions | 69 mm x 31 mm x 4 mm | 43 mm x 43 mm | 45 mm x 30 mm x 3 mm | 65 mm x 56 mm | 72 mm x 55 mm x 9 mm | 80 mm x 60 mm x 5 mm |
| Temperature | -25.0°C - 80.0°C | - | - | - | - | -40.0°C - 75.0°C |
| Software |
Linux: True (mainline) Windows: 10 IoT core |
Linux: True | Linux: True | Linux: True |
Linux: True Android: Android |
Linux: True Android: 2.6 |