Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
Raspberry Pi Foundation Raspberry Pi Compute Module 3 vs. Radxa Rock Pi S vs. Sinovoip Banana Pi BP1-M2 vs. Geniatech XPI-S905X vs. CubieTech Cubieboard A20 vs. TechNexion PICO-IMX8M
Raspberry Pi Compute Module 3 |
Rock Pi S |
Banana Pi BP1-M2 |
XPI-S905X |
Cubieboard A20 |
PICO-IMX8M |
|
| Manufacturer | Raspberry Pi Foundation | Radxa | Sinovoip | Geniatech | CubieTech | TechNexion |
| Price | $ 30.0 | $ 14.0 | $ 59.0 | $ 35.0 | $ 59.0 | $ 51.0 |
| SoC | Broadcom BCM2837 | Rockchip RK3308 | AllWinner A31S | Amlogic S905X | AllWinner A20 | NXP i.MX8M (Dual, QuadLite, or Quad) |
| CPU | 4× ARM Cortex-A53 @ 1.2 Ghz | 4× ARM Cortex-A35 @ 1.3 Ghz | 4× ARM Cortex-A7 @ 1.0 Ghz | 4× ARM Cortex-A53 @ 1.5 Ghz | 2× ARM Cortex-A7 @ 1.2 Ghz | 4× ARM Cortex-A53 cores @ 1.5 Ghz |
| GPU | VideoCore IV | - | PowerVR SGX544MP2 | Mali 450 | Mali-400 MP2 | Vivante GC7000Lite |
| RAM | 1.0 GiB DDR3 | 512.0 MiB DDR3 | 1.0 GiB DDR3 | 4.0 GiB | 1.0 GiB DDR3 | 4.0 GiB LPDDR4 |
| eMMC | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered |
| USB |
1 × host port 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
4 × host ports 1 of which support USB-OTG |
4 × host ports |
2 × host ports 1 of which support USB-OTG |
2 × host ports 1 of which support USB-OTG |
| Ethernet |
1× 10/100 supports passive and active PoE
|
1× 1 Gbps
|
1× 10/100
|
1× 10/100
|
1× 1 Gbps
|
|
| Wi-Fi | - |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
On-board Wi-Fi without external antenna | - |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
| Bluetooth | - | onboard | - | onboard | - | onboard |
| Camera | up to 2 x inputs | - | - | - | up to 1 x inputs | up to 1 x inputs |
| Audio | - |
1 × outputs 1 × line-in 1 × mic-in 1 × I2S |
1 × outputs |
2 × spdif-out 8 × I2S |
1 × outputs 1 × line-in |
2 × I2S |
| GPIO | 48 | 52 | 40 | 40 | 96 | 1 |
| PWM | 2 | 3 | - | 3 | - | 4 |
| ADC | - | 1 | - | - | 1 | - |
| I2C | 2 | 4 | - | 4 | - | 3 |
| SPI | 2 | 3 | - | - | - | 2 |
| UART | 2 | 3 | - | 1 | - | 2 |
| Pin header |
HAT (Raspberry Pi) |
- | - |
HAT (Raspberry Pi) |
- | - |
| Form factor | Raspberry Pi Compute Module 3 | - | - | - | - | - |
| Dimensions | 69 mm x 31 mm x 4 mm | 43 mm x 43 mm | - | 85 mm x 56 mm x 1.6 mm | - | 40 mm x 37 mm |
| Temperature | -25.0°C - 80.0°C | - | - | -5.0°C - 30.0°C | - | 0.0°C - 60.0°C |
| Software |
Linux: True (mainline) Windows: 10 IoT core |
Linux: True |
Linux: True Android: 4.4 |
Linux: True Android: 7.1 |
Linux: True Android: 4.2 |
Linux: True Android: Android |