Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
Raspberry Pi Foundation Raspberry Pi Compute Module 3 vs. Sinovoip Banana Pi BP1-M2 vs. Next Thing Co. CHIP Pro vs. Raspberry Pi Foundation Raspberry Pi Compute Module 4 vs. Zepan LicheePi One vs. SECO UDOO Dual Basic
Raspberry Pi Compute Module 3 |
Banana Pi BP1-M2 |
CHIP Pro |
Raspberry Pi Compute Module 4 |
LicheePi One |
UDOO Dual Basic |
|
| Manufacturer | Raspberry Pi Foundation | Sinovoip | Next Thing Co. | Raspberry Pi Foundation | Zepan | SECO |
| Price | $ 30.0 | $ 59.0 | $ 16.0 | $ 25.0 | $ 6.0 | $ 99.0 |
| SoC | Broadcom BCM2837 | AllWinner A31S | AllWinner R8 (Next Thing GR8) | Broadcom BCM2711 | AllWinner A13 | NXP i.MX 6 |
| CPU | 4× ARM Cortex-A53 @ 1.2 Ghz | 4× ARM Cortex-A7 @ 1.0 Ghz | 1× ARM Cortex-A8 @ 1.0 Ghz | 4× ARM Cortex-A72 @ 1.5 Ghz | 1× ARM Cortex-A8 @ 1.0 Ghz | 2× ARM Cortex-A9 @ 1.0 Ghz |
| GPU | VideoCore IV | PowerVR SGX544MP2 | Mali-400 | VideoCore VI | Mali 400 | Vivante GC 880 + Vivante GC 320 |
| RAM | 1.0 GiB DDR3 | 1.0 GiB DDR3 | - | 8.0 GiB LPDDR4 | 1.0 GiB DDR3 | 1.0 GiB |
| eMMC | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered |
| USB |
1 × host port 1 of which support USB-OTG |
4 × host ports 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
1 × host port |
1 × host port 1 of which support USB-OTG |
2 × host ports 2 of which support USB-OTG |
| Ethernet |
1× 1 Gbps
|
1× 1 Gbps
|
||||
| Wi-Fi | - |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
On-board Wi-Fi without external antenna | - |
| Bluetooth | - | - | onboard | onboard | onboard | - |
| Camera | up to 2 x inputs | - | up to 1 x inputs | up to 2 x inputs | up to 1 x inputs | - |
| Audio | - | 1 × outputs |
1 × outputs 2 × mic-in 1 × spdif-out 1 × I2S |
- | 1 × outputs |
1 × outputs 1 × mic-in |
| GPIO | 48 | 40 | 32 | 28 | 9 | 76 |
| PWM | 2 | - | 2 | - | - | - |
| ADC | - | - | - | - | - | 12 |
| I2C | 2 | - | 1 | 6 | 3 | - |
| SPI | 2 | - | 1 | 5 | 3 | - |
| UART | 2 | - | 2 | 6 | 3 | - |
| Pin header |
HAT (Raspberry Pi) |
- | - | - | - | Shield (Arduino) |
| Form factor | Raspberry Pi Compute Module 3 | - | - | Raspberry Pi Compute Module 4 | - | - |
| Dimensions | 69 mm x 31 mm x 4 mm | - | 45 mm x 30 mm x 3 mm | 55 mm x 40 mm | 72 mm x 55 mm x 9 mm | - |
| Temperature | -25.0°C - 80.0°C | - | - | 0.0°C - 80.0°C | - | - |
| Software |
Linux: True (mainline) Windows: 10 IoT core |
Linux: True Android: 4.4 |
Linux: True | Linux: True (mainline) |
Linux: True Android: Android |
Linux: True Android: 4.4 |