Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
Raspberry Pi Foundation Raspberry Pi Pico vs. MinnowBoard MinnowBoard MAX vs. Raspberry Pi Foundation Raspberry Pi Compute Module 3 vs. Radxa Rock Lite vs. Aaeon UP Xtreme Lite vs. Nvidia Jetson TX2 NX vs. Xunlong Software Orange Pi Plus vs. Arduino Arduino TRE vs. DFI BW551
Raspberry Pi Pico |
MinnowBoard MAX |
Raspberry Pi Compute Module 3 |
Rock Lite |
UP Xtreme Lite |
Jetson TX2 NX |
Orange Pi Plus |
Arduino TRE |
BW551 |
|
| Manufacturer | Raspberry Pi Foundation | MinnowBoard | Raspberry Pi Foundation | Radxa | Aaeon | Nvidia | Xunlong Software | Arduino | DFI |
| Price | $ 4.0 | $ 99.0 | $ 30.0 | $ 39.0 | - | $ 199.0 | $ 49.0 | - | - |
| SoC | Raspberry Pi Foundation RP2040 | Intel E3815 | Broadcom BCM2837 | Rockchip RK3188 | Intel Core i7-8265U | Nvidia Tegra X2 | Allwinner H3 | TI AM335x | Intel Pentium/Celeron Processor N3000 Family |
| CPU | 2× ARM Cortex-M0+ @ 133 Mhz | 1× Intel Atom @ 1.46 Ghz | 4× ARM Cortex-A53 @ 1.2 Ghz | 4× ARM Cortex-A9 @ 1.6 Ghz | 4× Intel Whiskey Lake @ 1.8 Ghz | 6× Nvidia Denver 2 + ARM Cortex-A57 MPCore @ 2.0 Ghz | 4× ARM Cortex-A7 @ 1.54 Ghz | 1× ARM Cortex-A8 @ 1.0 Ghz | 4× x86 @ 1.6 Ghz |
| GPU | - | Intel HD Graphics | VideoCore IV | Mali-400 MP4 | Intel Gen 9 Graphics | Nvidia Pascal GPU (256x CUDA cores @1.3GHz) | MP400MP2 | SGX530 | - |
| RAM | 1.0 GiB | 1.0 GiB DDR3 | 1.0 GiB | 4.0 GiB LPDDR4 | 1.0 GiB DDR3 | 1.0 GiB | 8.0 GiB DDR3L | ||
| eMMC | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | - |
| USB | 1 × host port | 2 × host ports |
1 × host port 1 of which support USB-OTG |
2 × host ports 1 of which support USB-OTG |
5 × host ports | 4 × host ports |
4 × host ports 1 of which support USB-OTG |
4 × host ports 1 of which support USB-OTG |
6 × host ports |
| Ethernet |
1× 1 Gbps
|
1× 10/100
|
1× 1 Gbps
|
1× 1 Gbps
|
1× 1 Gbps
|
1× 10/100
|
1× 1 Gbps
|
||
| Wi-Fi | - | - | - |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
- |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
- | - |
| Bluetooth | - | - | - | - | onboard | - | - | - | - |
| Camera | - | - | up to 2 x inputs | up to 1 x inputs | - | up to 5 x inputs | up to 1 x inputs | - | - |
| Audio | - | - | - |
1 × outputs 1 × spdif-out |
1 × outputs 1 × mic-in |
- | 1 × outputs |
1 × outputs 1 × line-in |
1 × outputs 1 × mic-in |
| GPIO | 26 | 8 | 48 | 80 | 40 | - | 40 | 12 | 8 |
| PWM | 16 | 1 | 2 | 4 | - | - | 1 | 1 | - |
| ADC | 3 | - | - | 2 | - | - | - | 1 | - |
| I2C | 2 | - | 2 | 1 | - | 4 | 2 | - | - |
| SPI | 2 | - | 2 | 2 | - | 2 | 1 | - | 1 |
| UART | 2 | - | 2 | 2 | 3 | 3 | 2 | - | - |
| CAN | - | - | - | - | - | 1 | - | - | - |
| Pin header | - | - |
HAT (Raspberry Pi) |
- | - | - | - | Shield (Arduino) | - |
| Form factor | - | - | Raspberry Pi Compute Module 3 | - | - | - | - | - | - |
| Dimensions | 51 mm x 21 mm | - | 69 mm x 31 mm x 4 mm | 100 mm x 80 mm x 12 mm | 122 mm x 129 mm x 22 mm | 70 mm x 45 mm | 60 mm x 108 mm x 20 mm | 115 mm x 105 mm x 25 mm | 146 mm x 102 mm |
| Temperature | -20.0°C - 85.0°C | - | -25.0°C - 80.0°C | - | 0.0°C - 60.0°C | - | -10.0°C - 75.0°C | - | 0.0°C - 60.0°C |
| Software | - |
Linux: True (mainline) Windows: Windows (x86_64) |
Linux: True (mainline) Windows: 10 IoT core |
Linux: True Android: 4.4 |
Linux: True (mainline) Windows: Windows (x86_64) |
Linux: True |
Linux: True Android: 4.4 |
Linux: True |
Linux: True (mainline) Windows: 7, WES7, 8.1, 10 IoT Enterprise |