Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
Raspberry Pi Foundation Raspberry Pi Pico vs. Raspberry Pi Foundation Raspberry Pi Compute Module 3 vs. Radxa Rock Lite vs. Aaeon UP Xtreme Lite vs. Sinovoip Banana Pi M2M Magic vs. Arduino Arduino TRE vs. DFI BW551
Raspberry Pi Pico |
Raspberry Pi Compute Module 3 |
Rock Lite |
UP Xtreme Lite |
Banana Pi M2M Magic |
Arduino TRE |
BW551 |
|
| Manufacturer | Raspberry Pi Foundation | Raspberry Pi Foundation | Radxa | Aaeon | Sinovoip | Arduino | DFI |
| Price | $ 4.0 | $ 30.0 | $ 39.0 | - | $ 23.0 | - | - |
| SoC | Raspberry Pi Foundation RP2040 | Broadcom BCM2837 | Rockchip RK3188 | Intel Core i7-8265U | AllWinner R16 / A33 | TI AM335x | Intel Pentium/Celeron Processor N3000 Family |
| CPU | 2× ARM Cortex-M0+ @ 133 Mhz | 4× ARM Cortex-A53 @ 1.2 Ghz | 4× ARM Cortex-A9 @ 1.6 Ghz | 4× Intel Whiskey Lake @ 1.8 Ghz | 4× ARM Cortex-A7 @ 1.2 Ghz | 1× ARM Cortex-A8 @ 1.0 Ghz | 4× x86 @ 1.6 Ghz |
| GPU | - | VideoCore IV | Mali-400 MP4 | Intel Gen 9 Graphics | Mali-400 MP2 | SGX530 | - |
| RAM | 1.0 GiB DDR3 | 1.0 GiB | 1.0 GiB DDR3 | 1.0 GiB | 8.0 GiB DDR3L | ||
| eMMC | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | - |
| USB | 1 × host port |
1 × host port 1 of which support USB-OTG |
2 × host ports 1 of which support USB-OTG |
5 × host ports |
1 × host port 1 of which support USB-OTG |
4 × host ports 1 of which support USB-OTG |
6 × host ports |
| Ethernet |
1× 10/100
|
1× 1 Gbps
|
1× 10/100
|
1× 1 Gbps
|
|||
| Wi-Fi | - | - |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
- | - |
| Bluetooth | - | - | - | onboard | onboard | - | - |
| Camera | - | up to 2 x inputs | up to 1 x inputs | - | up to 1 x inputs | - | - |
| Audio | - | - |
1 × outputs 1 × spdif-out |
1 × outputs 1 × mic-in |
1 × I2S |
1 × outputs 1 × line-in |
1 × outputs 1 × mic-in |
| GPIO | 26 | 48 | 80 | 40 | 40 | 12 | 8 |
| PWM | 16 | 2 | 4 | - | 1 | 1 | - |
| ADC | 3 | - | 2 | - | - | 1 | - |
| I2C | 2 | 2 | 1 | - | 1 | - | - |
| SPI | 2 | 2 | 2 | - | 1 | - | 1 |
| UART | 2 | 2 | 2 | 3 | 2 | - | - |
| Pin header | - |
HAT (Raspberry Pi) |
- | - | - | Shield (Arduino) | - |
| Form factor | - | Raspberry Pi Compute Module 3 | - | - | - | - | - |
| Dimensions | 51 mm x 21 mm | 69 mm x 31 mm x 4 mm | 100 mm x 80 mm x 12 mm | 122 mm x 129 mm x 22 mm | 51 mm x 51 mm x 11 mm | 115 mm x 105 mm x 25 mm | 146 mm x 102 mm |
| Temperature | -20.0°C - 85.0°C | -25.0°C - 80.0°C | - | 0.0°C - 60.0°C | - | - | 0.0°C - 60.0°C |
| Software | - |
Linux: True (mainline) Windows: 10 IoT core |
Linux: True Android: 4.4 |
Linux: True (mainline) Windows: Windows (x86_64) |
Linux: True | Linux: True |
Linux: True (mainline) Windows: 7, WES7, 8.1, 10 IoT Enterprise |