Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
Raspberry Pi Foundation Raspberry Pi Zero 2 W vs. Arduino Arduino TRE vs. GreenWaves GAPuino GAP8
Raspberry Pi Zero 2 W |
Arduino TRE |
GAPuino GAP8 |
|
| Manufacturer | Raspberry Pi Foundation | Arduino | GreenWaves |
| Price | $ 15.0 | - | $ 110.0 |
| SoC | Broadcom BCM2710A1 | TI AM335x | GreenWaves GAP8 |
| CPU | 4× ARM Cortex-A53 @ 1.0 Ghz | 1× ARM Cortex-A8 @ 1.0 Ghz | 8× RISC-V @ 250 Mhz |
| GPU | VideoCore IV | SGX530 | - |
| RAM | 512.0 MiB DDR3 | 1.0 GiB | - |
| eMMC | - | 1 × soldered | 1 × soldered |
| SD | 1 × bootable: True | - | - |
| USB |
1 × host port 1 of which support USB-OTG |
4 × host ports 1 of which support USB-OTG |
- |
| Ethernet |
1× 10/100
|
||
| Wi-Fi |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
- | - |
| Bluetooth | onboard | - | - |
| Camera | up to 1 x inputs | - | up to 1 x inputs |
| Audio |
1 × outputs 1 × I2S |
1 × outputs 1 × line-in |
- |
| GPIO | 40 | 12 | 14 |
| PWM | 1 | 1 | 4 |
| ADC | - | 1 | - |
| I2C | 1 | - | 1 |
| SPI | 1 | - | - |
| UART | 1 | - | 1 |
| Pin header |
HAT (Raspberry Pi) |
Shield (Arduino) | Shield (Arduino) |
| Form factor | Raspberry Pi Zero | - | - |
| Dimensions | 65 mm x 30 mm x 5 mm | 115 mm x 105 mm x 25 mm | 180 mm x 100 mm x 50 mm |
| Temperature | 0.0°C - 50.0°C | - | - |
| Software | Linux: True (mainline) | Linux: True | - |