Board Technical Specifications Comparison

Add boards using the dropdown below, and compare their specs side by side.

Raspberry Pi Foundation Raspberry Pi Zero 2 W vs. Arduino Arduino TRE vs. GreenWaves GAPuino GAP8 vs. Calao SMC-NTKE1 vs. ST Microelectronics STM32F7 6G Discovery


Raspberry Pi Zero 2 W

Arduino TRE

GAPuino GAP8

SMC-NTKE1

STM32F7 6G Discovery
Manufacturer Raspberry Pi Foundation Arduino GreenWaves Calao ST Microelectronics
Price $ 15.0 - $ 110.0 - $ 54.0
SoC Broadcom BCM2710A1 TI AM335x GreenWaves GAP8 Nvidia Tegra K1 STM32 STM32F746NG
CPU 4× ARM Cortex-A53 @ 1.0 Ghz 1× ARM Cortex-A8 @ 1.0 Ghz 8× RISC-V @ 250 Mhz 4× ARM Cortex-A15 @ 2.3 Ghz 1× ARM Cortex-M7 @ 220 Mhz
GPU VideoCore IV SGX530 - 192-core Mobile Kepler -
RAM 512.0 MiB DDR3 1.0 GiB - 2.0 GiB -
eMMC - 1 × soldered 1 × soldered 1 × soldered 1 × soldered
SD 1 × bootable: True - - - -
USB 1 × host port
1 of which support USB-OTG
4 × host ports
1 of which support USB-OTG
- 2 × host ports
1 of which support USB-OTG
1 × host port
2 of which support USB-OTG
Ethernet
1× 10/100
1× 1 Gbps
1× 10/100
Wi-Fi On-board Wi-Fi without external antenna
2.4Ghz b/g/n
- - - -
Bluetooth onboard - - - -
Camera up to 1 x inputs - up to 1 x inputs up to 2 x inputs -
Audio 1 × outputs
1 × I2S
1 × outputs
1 × line-in
-
1 × spdif-out
1 × I2S
1 × outputs
1 × line-in
2 × mic-in
1 × spdif-out
GPIO 40 12 14 12 168
PWM 1 1 4 - -
ADC - 1 - - 3
I2C 1 - 1 3 4
SPI 1 - - 2 6
UART 1 - 1 4 8
CAN - - - - 2
Pin header HAT (Raspberry Pi)
Shield (Arduino) Shield (Arduino) - Shield (Arduino)
Form factor Raspberry Pi Zero - - - -
Dimensions 65 mm x 30 mm x 5 mm 115 mm x 105 mm x 25 mm 180 mm x 100 mm x 50 mm 82 mm x 50 mm x 5 mm 130 mm x 80 mm
Temperature 0.0°C - 50.0°C - - -25.0°C - 85.0°C -
Software Linux: True (mainline) Linux: True - Linux: True -