Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
Raspberry Pi Foundation Raspberry Pi Zero 2 W vs. Arduino Arduino TRE vs. GreenWaves GAPuino GAP8 vs. Compulab CL-SOM-iMX8X vs. Roseapple Pi Roseapple Pi vs. Calao SMC-NTKE1 vs. ST Microelectronics STM32F7 6G Discovery
Raspberry Pi Zero 2 W |
Arduino TRE |
GAPuino GAP8 |
CL-SOM-iMX8X |
Roseapple Pi |
SMC-NTKE1 |
STM32F7 6G Discovery |
|
| Manufacturer | Raspberry Pi Foundation | Arduino | GreenWaves | Compulab | Roseapple Pi | Calao | ST Microelectronics |
| Price | $ 15.0 | - | $ 110.0 | - | - | - | $ 54.0 |
| SoC | Broadcom BCM2710A1 | TI AM335x | GreenWaves GAP8 | NXP i.MX8 QuadXPlus | Actions Semi S500 | Nvidia Tegra K1 | STM32 STM32F746NG |
| CPU | 4× ARM Cortex-A53 @ 1.0 Ghz | 1× ARM Cortex-A8 @ 1.0 Ghz | 8× RISC-V @ 250 Mhz | 4× ARM Cortex-A35 @ 1.2 Ghz | 4× ARM Cortex-A9 @ 1.3 Ghz | 4× ARM Cortex-A15 @ 2.3 Ghz | 1× ARM Cortex-M7 @ 220 Mhz |
| GPU | VideoCore IV | SGX530 | - | GC7000Lite | PowerVR SGX544 | 192-core Mobile Kepler | - |
| RAM | 512.0 MiB DDR3 | 1.0 GiB | - | 4.0 GiB LPDDR4 | 2.0 GiB | 2.0 GiB | - |
| eMMC | - | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered |
| SD | 1 × bootable: True | - | - | - | - | - | - |
| USB |
1 × host port 1 of which support USB-OTG |
4 × host ports 1 of which support USB-OTG |
- |
4 × host ports 1 of which support USB-OTG |
3 × host ports |
2 × host ports 1 of which support USB-OTG |
1 × host port 2 of which support USB-OTG |
| Ethernet |
1× 10/100
|
1× 1 Gbps
|
1× 10/100
|
1× 1 Gbps
|
1× 10/100
|
||
| Wi-Fi |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
- | - |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
On-board Wi-Fi without external antenna | - | - |
| Bluetooth | onboard | - | - | onboard | - | - | - |
| Camera | up to 1 x inputs | - | up to 1 x inputs | up to 1 x inputs | up to 1 x inputs | up to 2 x inputs | - |
| Audio |
1 × outputs 1 × I2S |
1 × outputs 1 × line-in |
- |
1 × spdif-out 1 × I2S |
1 × outputs 1 × mic-in 1 × I2S |
1 × spdif-out 1 × I2S |
1 × outputs 1 × line-in 2 × mic-in 1 × spdif-out |
| GPIO | 40 | 12 | 14 | 96 | 16 | 12 | 168 |
| PWM | 1 | 1 | 4 | 4 | - | - | - |
| ADC | - | 1 | - | 5 | - | - | 3 |
| I2C | 1 | - | 1 | 4 | 1 | 3 | 4 |
| SPI | 1 | - | - | 4 | 1 | 2 | 6 |
| UART | 1 | - | 1 | 4 | 1 | 4 | 8 |
| CAN | - | - | - | - | - | - | 2 |
| Pin header |
HAT (Raspberry Pi) |
Shield (Arduino) | Shield (Arduino) | - |
HAT (Raspberry Pi) |
- | Shield (Arduino) |
| Form factor | Raspberry Pi Zero | - | - | - | - | - | - |
| Dimensions | 65 mm x 30 mm x 5 mm | 115 mm x 105 mm x 25 mm | 180 mm x 100 mm x 50 mm | 68 mm x 38 mm x 5 mm | 85 mm x 56 mm x 15 mm | 82 mm x 50 mm x 5 mm | 130 mm x 80 mm |
| Temperature | 0.0°C - 50.0°C | - | - | 0.0°C - 70.0°C | - | -25.0°C - 85.0°C | - |
| Software | Linux: True (mainline) | Linux: True | - | Linux: True |
Linux: True Android: 5.1 |
Linux: True | - |