Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
Raspberry Pi Foundation Raspberry Pi Zero 2 W vs. Arduino Arduino TRE vs. Intrinsyc Open-Q 820Pro vs. GreenWaves GAPuino GAP8 vs. Compulab CL-SOM-iMX8X vs. Libre Computer Tritium 2GB vs. SolidRun i.MX8M Mini SOM vs. TechNexion Wandboard i.MX8M Plus vs. Novasom N1 vs. FriendlyElec NanoPi R1S-H5
Raspberry Pi Zero 2 W |
Arduino TRE |
Open-Q 820Pro |
GAPuino GAP8 |
CL-SOM-iMX8X |
Tritium 2GB |
i.MX8M Mini SOM |
Wandboard i.MX8M Plus |
N1 |
NanoPi R1S-H5 |
|
| Manufacturer | Raspberry Pi Foundation | Arduino | Intrinsyc | GreenWaves | Compulab | Libre Computer | SolidRun | TechNexion | Novasom | FriendlyElec |
| Price | $ 15.0 | - | $ 259.0 | $ 110.0 | - | $ 29.0 | - | $ 159.0 | - | $ 20.0 |
| SoC | Broadcom BCM2710A1 | TI AM335x | Qualcomm Snapdragon 820E | GreenWaves GAP8 | NXP i.MX8 QuadXPlus | AllWinner H5 | NXP i.MX8M Mini Q | NXP i.MX8M Plus | NXP LS1012 | Allwinner H5 |
| CPU | 4× ARM Cortex-A53 @ 1.0 Ghz | 1× ARM Cortex-A8 @ 1.0 Ghz | 4× Kyro @ 2.3 Ghz | 8× RISC-V @ 250 Mhz | 4× ARM Cortex-A35 @ 1.2 Ghz | 4× ARM Cortex-A53 @ 1.0 Ghz | 4× ARM Cortex-A53 @ 1.8 Ghz | 4× ARM Cortex-A53 @ 1.8 Ghz | 1× ARM Cortex-A53 @ 800 Mhz | 4× ARM Cortex-A53 @ 1.3 Ghz |
| GPU | VideoCore IV | SGX530 | Adreno 530 | - | GC7000Lite | Mali-450 MP4 | GC NanoUltra (3D) + GC320 (2D) | Vivante GC520L (2D) and GC7000UL (3D) | - | Mali450 MP4 |
| RAM | 512.0 MiB DDR3 | 1.0 GiB | 4.0 GiB LPDDR4 | - | 4.0 GiB LPDDR4 | 2.0 GiB DDR3 | 4.0 GiB LPDDR4 | 4.0 GiB LPDDR4 | 1.0 GiB DDR3 | 1.0 GiB DDR3 |
| eMMC | - | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered |
| SD | 1 × bootable: True | - | - | - | - | - | - | - | - | - |
| USB |
1 × host port 1 of which support USB-OTG |
4 × host ports 1 of which support USB-OTG |
2 × host ports | - |
4 × host ports 1 of which support USB-OTG |
4 × host ports | 2 × host ports |
3 × host ports 1 of which are Type-C 1 of which support USB-OTG |
4 × host ports | 1 × host port |
| Ethernet |
1× 10/100
|
1× 1 Gbps
|
1× 10/100
|
1× 1 Gbps
|
1× 1 Gbps
|
1× 1 Gbps
|
1× 1 Gbps
|
|||
| Wi-Fi |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
- |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
- |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
- | On-board Wi-Fi without external antenna |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
- |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n |
| Bluetooth | onboard | - | onboard | - | onboard | - | onboard | onboard | - | - |
| Camera | up to 1 x inputs | - | up to 3 x inputs | up to 1 x inputs | up to 1 x inputs | up to 1 x inputs | up to 1 x inputs | up to 2 x inputs | - | - |
| Audio |
1 × outputs 1 × I2S |
1 × outputs 1 × line-in |
1 × outputs 3 × I2S |
- |
1 × spdif-out 1 × I2S |
1 × outputs |
1 × spdif-out |
1 × I2S |
- | - |
| GPIO | 40 | 12 | 8 | 14 | 96 | 40 | 75 | 1 | 4 | - |
| PWM | 1 | 1 | - | 4 | 4 | 1 | 4 | 1 | - | - |
| ADC | - | 1 | - | - | 5 | - | - | - | - | - |
| I2C | 1 | - | 8 | 1 | 4 | 1 | 2 | 1 | - | - |
| SPI | 1 | - | 8 | - | 4 | 1 | 1 | 1 | 2 | - |
| UART | 1 | - | 8 | 1 | 4 | 2 | 3 | 3 | 1 | - |
| CAN | - | - | - | - | - | - | - | 1 | - | - |
| Pin header |
HAT (Raspberry Pi) |
Shield (Arduino) | - | Shield (Arduino) | - |
HAT (Raspberry Pi) |
- | - | - | - |
| Form factor | Raspberry Pi Zero | - | - | - | - | - | - | - | Mini-ITX | - |
| Dimensions | 65 mm x 30 mm x 5 mm | 115 mm x 105 mm x 25 mm | 50 mm x 25 mm | 180 mm x 100 mm x 50 mm | 68 mm x 38 mm x 5 mm | 86 mm x 56 mm x 21 mm | 47 mm x 30 mm | 69 mm x 35 mm | 170 mm x 170 mm | 55 mm x 52 mm |
| Temperature | 0.0°C - 50.0°C | - | -10.0°C - 70.0°C | - | 0.0°C - 70.0°C | - | 0.0°C - 70.0°C | 0.0°C - 50.0°C | -40.0°C - 85.0°C | -20.0°C - 70.0°C |
| Software | Linux: True (mainline) | Linux: True |
Linux: True Android: 9 |
- | Linux: True |
Linux: True Android: 7.1 |
Linux: True Android: yes |
Linux: True Android: Android |
Linux: True | Linux: True |