Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
Raspberry Pi Foundation Raspberry Pi Zero 2 W vs. Raspberry Pi Foundation Raspberry Pi 4 Model B vs. Raspberry Pi Foundation Raspberry Pi 3 Model B+ vs. AVNET Ultra96 vs. Scalys Grapeboard
Raspberry Pi Zero 2 W |
Raspberry Pi 4 Model B |
Raspberry Pi 3 Model B+ |
Ultra96 |
Grapeboard |
|
| Manufacturer | Raspberry Pi Foundation | Raspberry Pi Foundation | Raspberry Pi Foundation | AVNET | Scalys |
| Price | $ 15.0 | $ 35.0 | $ 35.0 | $ 249.0 | $ 209.0 |
| SoC | Broadcom BCM2710A1 | Broadcom BCM2711B0 | Broadcom BCM2837B0 | Xilinx Zynq UltraScale+ ZU3EG A484 | NXP/QorIQ LS1012A |
| CPU | 4× ARM Cortex-A53 @ 1.0 Ghz | 4× ARM Cortex-A72 @ 1.5 Ghz | 4× ARM Cortex-A53 @ 1.4 Ghz |
4× ARM Cortex-A53 @ 1.5 Ghz 2× ARM Cortex-R5F @ 533 Mhz |
1× ARM Cortex-A53 @ 800 Mhz |
| GPU | VideoCore IV | VideoCore VI | VideoCore IV | Mali-400 MP2 | - |
| RAM | 512.0 MiB DDR3 | 8.0 GiB LPDDR4 @ 3200MHz | 1.0 GiB DDR3 | 2.0 GiB LPDDR4 | 1.0 GiB DDR3L |
| eMMC | - | - | - | 1 × soldered | 1 × soldered |
| SD | 1 × bootable: True | 1 × bootable: True | 1 × bootable: True | - | - |
| USB |
1 × host port 1 of which support USB-OTG |
5 × host ports 1 of which are Type-C |
4 × host ports 1 of which support USB-OTG |
3 × host ports 1 of which support USB-OTG |
2 × host ports 1 of which support USB-OTG |
| Ethernet |
1× 1 Gbps supports passive and active PoE
|
1× 1 Gbps supports passive and active PoE
|
1× 1 Gbps
|
||
| Wi-Fi |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n/ax 5Ghz a/n/ac/ax |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n |
| Bluetooth | onboard | onboard | onboard | onboard | onboard |
| Camera | up to 1 x inputs | up to 1 x inputs | up to 1 x inputs | - | - |
| Audio |
1 × outputs 1 × I2S |
1 × outputs 1 × I2S |
1 × outputs 1 × I2S |
- | - |
| GPIO | 40 | 26 | 40 | 100 | 26 |
| PWM | 1 | 4 | 1 | - | 1 |
| I2C | 1 | 2 | 1 | - | 1 |
| SPI | 1 | 2 | 1 | - | 1 |
| UART | 1 | 1 | 1 | - | 2 |
| Pin header |
HAT (Raspberry Pi) |
HAT (Raspberry Pi) |
HAT (Raspberry Pi) |
- |
HAT (Raspberry Pi) |
| Form factor | Raspberry Pi Zero | Raspberry Pi | Raspberry Pi | 96boards CE v1.0 | - |
| Dimensions | 65 mm x 30 mm x 5 mm | 85 mm x 56 mm x 20 mm | 85 mm x 56 mm x 17 mm | 85 mm x 54 mm x 10 mm | 86 mm x 56 mm x 22 mm |
| Temperature | 0.0°C - 50.0°C | 0.0°C - 50.0°C | 0.0°C - 45.0°C | - | - |
| Software | Linux: True (mainline) | Linux: True (mainline) |
Linux: True (mainline) Windows: 10 IoT Core |
Linux: True | Linux: True |