Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
Raspberry Pi Foundation Raspberry Pi Zero 2 W vs. Variscite VAR-SOM-MX8M-PLUS vs. FriendlyElec NanoPi M2 vs. FriendlyElec NanoPC-T3 vs. Sinovoip Banana Pi R2
Raspberry Pi Zero 2 W |
VAR-SOM-MX8M-PLUS |
NanoPi M2 |
NanoPC-T3 |
Banana Pi R2 |
|
| Manufacturer | Raspberry Pi Foundation | Variscite | FriendlyElec | FriendlyElec | Sinovoip |
| Price | $ 15.0 | - | $ 25.0 | $ 60.0 | $ 82.0 |
| SoC | Broadcom BCM2710A1 | NXP iMX8M Plus | Samsung S5P4418 | Samsung S5P6818 | MediaTek MT7623N |
| CPU | 4× ARM Cortex-A53 @ 1.0 Ghz | 4× ARM Cortex-A53 @ 1.8 Ghz | 4× ARM Cortex-A9 @ 1.4 Ghz | 8× ARM Cortex-A53 @ 1.4 Ghz | 4× ARM Cortex-A7 @ 1.3 Ghz |
| GPU | VideoCore IV | GC7000UL, GC520L | Mali-400 MP | Mali-400 MP | Mali-450 MP4 |
| RAM | 512.0 MiB DDR3 | 4.0 GiB LPDDR4 with ECC | 1.0 GiB DDR3 | 1.0 GiB | 2.0 GiB |
| eMMC | - | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered |
| SD | 1 × bootable: True | - | - | - | - |
| USB |
1 × host port 1 of which support USB-OTG |
2 × host ports 2 of which support USB-OTG |
4 × host ports 1 of which support USB-OTG |
4 × host ports 1 of which support USB-OTG |
2 × host ports 1 of which support USB-OTG |
| Ethernet |
1× 1 Gbps
|
1× 1 Gbps
|
1× 1 Gbps
|
1× 1 Gbps
|
|
| Wi-Fi |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
- |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
| Bluetooth | onboard | onboard | - | onboard | onboard |
| Camera | up to 1 x inputs | up to 2 x inputs | up to 1 x inputs | up to 1 x inputs | up to 1 x inputs |
| Audio |
1 × outputs 1 × I2S |
1 × outputs 1 × line-in 1 × mic-in 1 × spdif-out 6 × I2S |
1 × outputs | 1 × outputs |
1 × outputs 1 × I2S |
| GPIO | 40 | 104 | 40 | 30 | 28 |
| PWM | 1 | 4 | 3 | 3 | 1 |
| I2C | 1 | 6 | 2 | 1 | 1 |
| SPI | 1 | 3 | 2 | 1 | 1 |
| UART | 1 | 4 | 3 | 4 | 1 |
| CAN | - | 2 | - | - | - |
| Pin header |
HAT (Raspberry Pi) |
- |
HAT (Raspberry Pi) |
- |
HAT (Raspberry Pi) |
| Form factor | Raspberry Pi Zero | - | - | - | - |
| Dimensions | 65 mm x 30 mm x 5 mm | 68 mm x 33 mm | 64 mm x 56 mm x 15 mm | 100 mm x 60 mm x 15 mm | 148 mm x 100 mm x 18 mm |
| Temperature | 0.0°C - 50.0°C | -40.0°C - 85.0°C | - | - | - |
| Software | Linux: True (mainline) |
Linux: True Android: Yes |
Linux: True Android: 5.1 |
Linux: True Android: 5.1 |
Linux: True Android: 5.1 |