Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
Sinovoip Banana Pi BP1-M2 vs. Next Thing Co. CHIP Pro vs. Arduino Arduino TRE vs. WallysTech DR4029
Banana Pi BP1-M2 |
CHIP Pro |
Arduino TRE |
DR4029 |
|
| Manufacturer | Sinovoip | Next Thing Co. | Arduino | WallysTech |
| Price | $ 59.0 | $ 16.0 | - | - |
| SoC | AllWinner A31S | AllWinner R8 (Next Thing GR8) | TI AM335x | Qualcomm IPQ4029 |
| CPU | 4× ARM Cortex-A7 @ 1.0 Ghz | 1× ARM Cortex-A8 @ 1.0 Ghz | 1× ARM Cortex-A8 @ 1.0 Ghz | 4× ARM Cortex-A7 @ 720 Mhz |
| GPU | PowerVR SGX544MP2 | Mali-400 | SGX530 | - |
| RAM | 1.0 GiB DDR3 | - | 1.0 GiB | 512.0 GiB |
| eMMC | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered |
| USB |
4 × host ports 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
4 × host ports 1 of which support USB-OTG |
1 × host port |
| Ethernet |
1× 1 Gbps
|
1× 10/100
|
1× 1 Gbps supports passive and active PoE
|
|
| Wi-Fi |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n |
- |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
| Bluetooth | - | onboard | - | - |
| Modem | - | - | - | onboard |
| Camera | - | up to 1 x inputs | - | - |
| Audio | 1 × outputs |
1 × outputs 2 × mic-in 1 × spdif-out 1 × I2S |
1 × outputs 1 × line-in |
- |
| GPIO | 40 | 32 | 12 | 6 |
| PWM | - | 2 | 1 | - |
| ADC | - | - | 1 | - |
| I2C | - | 1 | - | - |
| SPI | - | 1 | - | - |
| UART | - | 2 | - | 2 |
| Pin header | - | - | Shield (Arduino) | - |
| Dimensions | - | 45 mm x 30 mm x 3 mm | 115 mm x 105 mm x 25 mm | 115 mm x 105 mm x 16 mm |
| Temperature | - | - | - | -40.0°C - 70.0°C |
| Software |
Linux: True Android: 4.4 |
Linux: True | Linux: True | Linux: True |