Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
Sinovoip Banana Pi BPI-EAI80 vs. Xunlong Software Orange Pi 2 vs. FriendlyElec NanoPi M4V2 vs. Wallys DR6018 V2 vs. HiSilicon HiKey 970
Banana Pi BPI-EAI80 |
Orange Pi 2 |
NanoPi M4V2 |
DR6018 V2 |
HiKey 970 |
|
| Manufacturer | Sinovoip | Xunlong Software | FriendlyElec | Wallys | HiSilicon |
| Price | $ 16.0 | $ 35.0 | $ 70.0 | $ 200.0 | $ 300.0 |
| SoC | Edgeless EAI80 | Allwinner H3 | Rockchip RK3399 | Qualcomm-Atheros IPQ6010 | Huawei HiSilicon Kirin 970 |
| CPU | 2× ARM Cortex-M4F @ 200 Mhz | 4× ARM Cortex-A7 @ 1.54 Ghz |
2× ARM Cortex-A72 @ 2.0 Ghz 4× ARM Cortex-A53 @ 1.5 Ghz |
4× ARM Cortex-A53 @ 1.8 Ghz |
4× ARM Cortex-A73 @ 2.36 Ghz 4× ARM Cortex-A53 @ 2.36 Ghz |
| GPU | - | MALI400MP2 | Mali-T860 MP4 | - | Mali G72-MP12 |
| RAM | 8.2 MiB | 1.0 GiB DDR3 | 4.0 GiB LPDDR4 | 6.0 GiB LPDDR4 | |
| eMMC | - | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered |
| USB |
1 × host port 1 of which are Type-C |
4 × host ports 1 of which support USB-OTG |
4 × host ports 1 of which are Type-C 1 of which support USB-OTG |
1 × host port 1 of which are Type-C 1 of which support USB-OTG |
3 × host ports 1 of which are Type-C 2 of which support USB-OTG |
| Ethernet |
1× 10/100
|
1× 1 Gbps
|
1× 2.5 Gbps supports passive and active PoE
|
1× 1 Gbps
|
|
| Wi-Fi |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n 5Ghz a/n/ac/ax |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
| Bluetooth | - | - | onboard | - | onboard |
| Modem | - | - | - | onboard | onboard |
| Camera | up to 1 x inputs | up to 1 x inputs | up to 2 x inputs | - | up to 2 x inputs |
| Audio | - | 1 × outputs |
1 × spdif-out 1 × I2S |
- |
1 × I2S |
| GPIO | 40 | 40 | 8 | - | 100 |
| PWM | - | - | 1 | - | - |
| I2C | - | 1 | 3 | - | 2 |
| SPI | - | 1 | 1 | - | 1 |
| UART | 1 | 1 | 1 | 1 | 2 |
| CAN | 1 | - | - | - | 1 |
| Pin header | - | - |
HAT (Raspberry Pi) |
- | - |
| Form factor | - | - | - | - | 96boards CE Extended |
| Dimensions | 86 mm x 54 mm | 93 mm x 60 mm x 17 mm | 85 mm x 56 mm | 185 mm x 116 mm | 100 mm x 85 mm x 10 mm |
| Temperature | - | -10.0°C - 65.0°C | -20.0°C - 80.0°C | -40.0°C - 70.0°C | 0.0°C - 70.0°C |
| Software | Linux: True |
Linux: True Android: 4.4 |
Linux: True Android: 10 |
Linux: True |
Linux: True Android: 8.1 |