Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
Sinovoip Banana Pi R2 vs. Inforce Inforce 6560 vs. Litemax APIX-KBL7 vs. LinkSprite pcDuino3B vs. iWave Systems iW-Rainbow-G27S vs. MYIR Tech MYC-C8MMX vs. GsD OrangeCrab vs. Next Thing Co. CHIP Pro vs. EmbedStudio Lemon Pi
Banana Pi R2 |
Inforce 6560 |
APIX-KBL7 |
pcDuino3B |
iW-Rainbow-G27S |
MYC-C8MMX |
OrangeCrab |
CHIP Pro |
Lemon Pi |
|
| Manufacturer | Sinovoip | Inforce | Litemax | LinkSprite | iWave Systems | MYIR Tech | GsD | Next Thing Co. | EmbedStudio |
| Price | $ 82.0 | $ 220.0 | - | $ 59.0 | - | $ 79.0 | $ 99.0 | $ 16.0 | $ 35.0 |
| SoC | MediaTek MT7623N | Qualcomm Snapdragon 660 (SDA660) | Intel Core i7/i5/i3 and Celeron | AllWinner A20 | NXP i.MX8 Quad MAX/Quad Plus | NXP i.MX 8M Mini | Lattice ECP5-25F | AllWinner R8 (Next Thing GR8) | Actions Semi S500 |
| CPU | 4× ARM Cortex-A7 @ 1.3 Ghz | 8× Qualcomm Kryo 260 @ 2.2 Ghz | 2× Intel Kaby Lake-U @ 2.8 Ghz | 2× ARM Cortex-A7 @ 1.0 Ghz | 4× ARM Cortex-A53 @ 1.2 Ghz | 4× ARM Cortex-A53 @ 1.8 Ghz | 1× RISC-V @ 70 Mhz | 1× ARM Cortex-A8 @ 1.0 Ghz | 4× ARM Cortex-A9r4 @ 1.6 Ghz |
| GPU | Mali-450 MP4 | Adreno 512 | Intel HD Gen9-LP Graphics | Mali-400 | GC7000XSVX | GC NanoUltra (3D); GC320 (2D) | - | Mali-400 | Imagination PowerVR SGX544 |
| RAM | 2.0 GiB | 3.0 GiB LPDDR4 | 16.0 GiB DDR4 | 1.0 GiB DDR3 | 4.0 GiB LPDDR4 | 4.0 GiB DDR4 | - | - | 1.0 GiB DDR3 |
| eMMC | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered |
| USB |
2 × host ports 1 of which support USB-OTG |
2 × host ports | 5 × host ports |
1 × host port 1 of which support USB-OTG |
3 × host ports 1 of which support USB-OTG |
2 × host ports 2 of which support USB-OTG |
1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
3 × host ports 1 of which support USB-OTG |
| Ethernet |
1× 1 Gbps
|
1× 1 Gbps supports passive and active PoE
|
1× 1 Gbps wake on lan supported
|
1× 1 Gbps
|
1× 1 Gbps wake on lan supported
|
1× 1 Gbps
|
1× 10/100
|
||
| Wi-Fi |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
- |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
- | - |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n |
- |
| Bluetooth | onboard | onboard | - | - | onboard | - | - | onboard | - |
| Modem | - | - | - | - | onboard | - | - | - | - |
| Camera | up to 1 x inputs | up to 2 x inputs | - | - | up to 2 x inputs | up to 1 x inputs | - | up to 1 x inputs | up to 1 x inputs |
| Audio |
1 × outputs 1 × I2S |
1 × outputs 1 × mic-in |
1 × outputs 1 × line-in 1 × mic-in |
1 × outputs |
1 × outputs 1 × mic-in 1 × spdif-out 1 × I2S |
1 × outputs 1 × line-in 1 × spdif-out 5 × I2S |
- |
1 × outputs 2 × mic-in 1 × spdif-out 1 × I2S |
1 × outputs 1 × mic-in 1 × I2S |
| GPIO | 28 | - | 8 | 14 | 15 | 100 | 20 | 32 | 40 |
| PWM | 1 | - | - | 1 | 4 | 4 | - | 2 | 4 |
| ADC | - | - | - | 1 | - | - | 6 | - | - |
| I2C | 1 | 1 | 1 | - | 3 | 4 | - | 1 | 1 |
| SPI | 1 | 1 | - | - | 2 | 3 | - | 1 | 1 |
| UART | 1 | 1 | 2 | - | 4 | 4 | - | 2 | 1 |
| CAN | - | - | - | - | 1 | - | - | - | - |
| Pin header |
HAT (Raspberry Pi) |
- | - | Shield (Arduino) | - | - | - | - |
HAT (Raspberry Pi) |
| Form factor | - | Pico-ITX | Pico-ITX | - | Pico-ITX | - | - | - | - |
| Dimensions | 148 mm x 100 mm x 18 mm | 100 mm x 72 mm | 100 mm x 72 mm x 18 mm | - | 100 mm x 72 mm | 60 mm x 49 mm | 51 mm x 23 mm x 9 mm | 45 mm x 30 mm x 3 mm | 85 mm x 56 mm x 13 mm |
| Temperature | - | 0.0°C - 70.0°C | 0.0°C - 60.0°C | - | -40.0°C - 85.0°C | 0.0°C - 70.0°C | - | - | - |
| Software |
Linux: True Android: 5.1 |
Linux: True Android: 8+ |
Linux: True Windows: 10 |
Linux: True Android: 4.2 |
Linux: True Android: 9.0 |
Linux: True Android: 9 |
Linux: True | Linux: True |
Linux: True Android: 5.0 |