Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
Sinovoip Banana Pi R2 vs. Litemax APIX-KBL7 vs. LinkSprite pcDuino3B vs. LinkSprite pcDuino2 vs. CubieTech Cubieboard A10 vs. DFI FS051 vs. Sinovoip Banana Pi Zero
Banana Pi R2 |
APIX-KBL7 |
pcDuino3B |
pcDuino2 |
Cubieboard A10 |
FS051 |
Banana Pi Zero |
|
| Manufacturer | Sinovoip | Litemax | LinkSprite | LinkSprite | CubieTech | DFI | Sinovoip |
| Price | $ 82.0 | - | $ 59.0 | $ 59.0 | $ 49.0 | - | - |
| SoC | MediaTek MT7623N | Intel Core i7/i5/i3 and Celeron | AllWinner A20 | AllWinner A10 | AllWinner A10 | NXP i.MX6 | AllWinner H2+ |
| CPU | 4× ARM Cortex-A7 @ 1.3 Ghz | 2× Intel Kaby Lake-U @ 2.8 Ghz | 2× ARM Cortex-A7 @ 1.0 Ghz | 1× ARM Cortex-A8 @ 1.0 Ghz | 1× ARM Cortex-A8 @ 1.2 Ghz | 4× ARM Cortex-A9 @ 1.0 Ghz | 4× ARM Cortex-A7 @ 1.0 Ghz |
| GPU | Mali-450 MP4 | Intel HD Gen9-LP Graphics | Mali-400 | OpenGL ES2.0, OpenVG 1.1 Mali 400 core | Mali-400 | - | Mali-400 MP2 600MHz |
| RAM | 2.0 GiB | 16.0 GiB DDR4 | 1.0 GiB DDR3 | 1.0 GiB DDR3 | 1.0 GiB DDR3 | 4.0 GiB DDR3L | 1.0 GiB DDR3 |
| eMMC | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered |
| USB |
2 × host ports 1 of which support USB-OTG |
5 × host ports |
1 × host port 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
2 × host ports 1 of which support USB-OTG |
5 × host ports 1 of which support USB-OTG |
1 of which support USB-OTG |
| Ethernet |
1× 1 Gbps
|
1× 1 Gbps wake on lan supported
|
1× 1 Gbps
|
1× 10/100
|
1× 10/100
|
1× 1 Gbps
|
|
| Wi-Fi |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
- |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
- | - |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
| Bluetooth | onboard | - | - | - | - | - | - |
| Camera | up to 1 x inputs | - | - | - | up to 1 x inputs | - | up to 1 x inputs |
| Audio |
1 × outputs 1 × I2S |
1 × outputs 1 × line-in 1 × mic-in |
1 × outputs | - |
1 × outputs 1 × line-in |
- | - |
| GPIO | 28 | 8 | 14 | 12 | 96 | 8 | 40 |
| PWM | 1 | - | 1 | 1 | - | - | 1 |
| ADC | - | - | 1 | 1 | 1 | - | - |
| I2C | 1 | 1 | - | - | - | - | 1 |
| SPI | 1 | - | - | - | - | - | 1 |
| UART | 1 | 2 | - | - | - | - | 1 |
| Pin header |
HAT (Raspberry Pi) |
- | Shield (Arduino) | Shield (Arduino) | - | - |
HAT (Raspberry Pi) |
| Form factor | - | Pico-ITX | - | - | - | Pico-ITX | Raspberry Pi Zero |
| Dimensions | 148 mm x 100 mm x 18 mm | 100 mm x 72 mm x 18 mm | - | - | - | 100 mm x 72 mm | 60 mm x 30 mm x 4 mm |
| Temperature | - | 0.0°C - 60.0°C | - | - | - | -20.0°C - 70.0°C | - |
| Software |
Linux: True Android: 5.1 |
Linux: True Windows: 10 |
Linux: True Android: 4.2 |
Linux: True Android: 4.2 |
Linux: True Android: 4.2 |
Linux: True Android: 5.1 |
Linux: True Android: 4.4 |