Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
Sinovoip Banana Pi R2 vs. Teensy Teensy 4.0 vs. Inforce Inforce 6560 vs. CubieTech Cubieboard A10
Banana Pi R2 |
Teensy 4.0 |
Inforce 6560 |
Cubieboard A10 |
|
| Manufacturer | Sinovoip | Teensy | Inforce | CubieTech |
| Price | $ 82.0 | $ 20.0 | $ 220.0 | $ 49.0 |
| SoC | MediaTek MT7623N | NXP i.MX RT1062 | Qualcomm Snapdragon 660 (SDA660) | AllWinner A10 |
| CPU | 4× ARM Cortex-A7 @ 1.3 Ghz | 1× ARM Cortex-M7 @ 600 Mhz | 8× Qualcomm Kryo 260 @ 2.2 Ghz | 1× ARM Cortex-A8 @ 1.2 Ghz |
| GPU | Mali-450 MP4 | - | Adreno 512 | Mali-400 |
| RAM | 2.0 GiB | - | 3.0 GiB LPDDR4 | 1.0 GiB DDR3 |
| eMMC | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered |
| USB |
2 × host ports 1 of which support USB-OTG |
2 × host ports | 2 × host ports |
2 × host ports 1 of which support USB-OTG |
| Ethernet |
1× 1 Gbps
|
1× 1 Gbps supports passive and active PoE
|
1× 10/100
|
|
| Wi-Fi |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
- |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
- |
| Bluetooth | onboard | - | onboard | - |
| Camera | up to 1 x inputs | - | up to 2 x inputs | up to 1 x inputs |
| Audio |
1 × outputs 1 × I2S |
1 × spdif-out 2 × I2S |
1 × outputs 1 × mic-in |
1 × outputs 1 × line-in |
| GPIO | 28 | 40 | - | 96 |
| PWM | 1 | 9 | - | - |
| ADC | - | 14 | - | 1 |
| I2C | 1 | 3 | 1 | - |
| SPI | 1 | 3 | 1 | - |
| UART | 1 | 7 | 1 | - |
| CAN | - | 3 | - | - |
| Pin header |
HAT (Raspberry Pi) |
Shield (Arduino) | - | - |
| Form factor | - | - | Pico-ITX | - |
| Dimensions | 148 mm x 100 mm x 18 mm | 36 mm x 18 mm | 100 mm x 72 mm | - |
| Temperature | - | - | 0.0°C - 70.0°C | - |
| Software |
Linux: True Android: 5.1 |
- |
Linux: True Android: 8+ |
Linux: True Android: 4.2 |