Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
Sinovoip Banana Pi R2 vs. Teensy Teensy 4.0 vs. Inforce Inforce 6560 vs. Litemax APIX-KBL7 vs. CubieTech CubieBoard 6 vs. ADL Embedded Solutions ADLE3900HDC vs. Technical Machine Tessel 2 vs. VersaLogic SandCat vs. StarFive VisionFive 2 8GB
Banana Pi R2 |
Teensy 4.0 |
Inforce 6560 |
APIX-KBL7 |
CubieBoard 6 |
ADLE3900HDC |
Tessel 2 |
SandCat |
VisionFive 2 8GB |
|
| Manufacturer | Sinovoip | Teensy | Inforce | Litemax | CubieTech | ADL Embedded Solutions | Technical Machine | VersaLogic | StarFive |
| Price | $ 82.0 | $ 20.0 | $ 220.0 | - | $ 69.0 | - | $ 35.0 | $ 430.0 | $ 85.0 |
| SoC | MediaTek MT7623N | NXP i.MX RT1062 | Qualcomm Snapdragon 660 (SDA660) | Intel Core i7/i5/i3 and Celeron | Actions Semi S500 | Intel Atom E39xx | MediaTek MT7620N | Intel Bay Trail | StarFive JH7110 |
| CPU | 4× ARM Cortex-A7 @ 1.3 Ghz | 1× ARM Cortex-M7 @ 600 Mhz | 8× Qualcomm Kryo 260 @ 2.2 Ghz | 2× Intel Kaby Lake-U @ 2.8 Ghz | 4× ARM Cortex-A9 @ 1.2 Ghz | 4× x86 @ 2.0 Ghz | 1× ARM Cortex-M0+ @ 580 Mhz | 2× Atom E3825 @ 1.33 Ghz | 4× SiFive U74 @ 1.5 Ghz |
| GPU | Mali-450 MP4 | - | Adreno 512 | Intel HD Gen9-LP Graphics | PowerVR SGX544 | Intel HD Graphics 505 | - | - | Imagination BXE-4-32 MC1 |
| RAM | 2.0 GiB | - | 3.0 GiB LPDDR4 | 16.0 GiB DDR4 | 2.0 GiB | 8.0 GiB LPDDR4 | - | 8.0 GiB DDR3L | 8.0 GiB LPDDR4 |
| SPI flash | - | - | - | - | - | - | - | - | 16.0 MiB, bootable |
| eMMC | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | - |
| SD | - | - | - | - | - | - | - | - | 1 × bootable: True |
| USB |
2 × host ports 1 of which support USB-OTG |
2 × host ports | 2 × host ports | 5 × host ports |
2 × host ports 1 of which support USB-OTG |
8 × host ports | 2 × host ports | 4 × host ports |
5 × host ports 1 of which are Type-C |
| Ethernet |
1× 1 Gbps
|
1× 1 Gbps supports passive and active PoE
|
1× 1 Gbps wake on lan supported
|
1× 10/100
|
1× 1 Gbps
|
1× 1 Gbps
|
2× 1 Gbps
|
||
| Wi-Fi |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
- |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
- |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n |
- |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
- | - |
| Bluetooth | onboard | - | onboard | - | onboard | - | - | - | - |
| Camera | up to 1 x inputs | - | up to 2 x inputs | - | up to 1 x inputs | - | - | - | up to 1 x inputs |
| Audio |
1 × outputs 1 × I2S |
1 × spdif-out 2 × I2S |
1 × outputs 1 × mic-in |
1 × outputs 1 × line-in 1 × mic-in |
1 × outputs 1 × mic-in |
- | - | - | 1 × outputs |
| GPIO | 28 | 40 | - | 8 | 96 | 8 | 18 | 8 | 28 |
| PWM | 1 | 9 | - | - | - | - | 1 | - | - |
| ADC | - | 14 | - | - | 1 | - | 1 | - | - |
| I2C | 1 | 3 | 1 | 1 | 1 | - | - | 1 | - |
| SPI | 1 | 3 | 1 | - | 1 | - | - | - | - |
| UART | 1 | 7 | 1 | 2 | 1 | - | - | 2 | 1 |
| CAN | - | 3 | - | - | - | - | - | - | - |
| Pin header |
HAT (Raspberry Pi) |
Shield (Arduino) | - | - | - | - | - | - | - |
| Form factor | - | - | Pico-ITX | Pico-ITX | - | - | - | - | Pico-ITX |
| Dimensions | 148 mm x 100 mm x 18 mm | 36 mm x 18 mm | 100 mm x 72 mm | 100 mm x 72 mm x 18 mm | 100 mm x 60 mm x 18 mm | 147 mm x 102 mm | 66 mm x 69 mm x 20 mm | 180 mm x 96 mm x 42 mm | 100 mm x 72 mm |
| Temperature | - | - | 0.0°C - 70.0°C | 0.0°C - 60.0°C | -20.0°C - 70.0°C | -20.0°C - 70.0°C | - | -40.0°C - 85.0°C | - |
| Software |
Linux: True Android: 5.1 |
- |
Linux: True Android: 8+ |
Linux: True Windows: 10 |
Linux: True Android: 5.1 |
Linux: True (mainline) Windows: yes |
Linux: True |
Linux: True Windows: Embedded |
Linux: True |