Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
Sinovoip Banana Pi R2 vs. Teensy Teensy 4.0 vs. Inforce Inforce 6560 vs. Litemax APIX-KBL7 vs. LinkSprite pcDuino3B vs. LinkSprite pcDuino2 vs. DFI FS051 vs. Next Thing Co. CHIP Pro
Banana Pi R2 |
Teensy 4.0 |
Inforce 6560 |
APIX-KBL7 |
pcDuino3B |
pcDuino2 |
FS051 |
CHIP Pro |
|
| Manufacturer | Sinovoip | Teensy | Inforce | Litemax | LinkSprite | LinkSprite | DFI | Next Thing Co. |
| Price | $ 82.0 | $ 20.0 | $ 220.0 | - | $ 59.0 | $ 59.0 | - | $ 16.0 |
| SoC | MediaTek MT7623N | NXP i.MX RT1062 | Qualcomm Snapdragon 660 (SDA660) | Intel Core i7/i5/i3 and Celeron | AllWinner A20 | AllWinner A10 | NXP i.MX6 | AllWinner R8 (Next Thing GR8) |
| CPU | 4× ARM Cortex-A7 @ 1.3 Ghz | 1× ARM Cortex-M7 @ 600 Mhz | 8× Qualcomm Kryo 260 @ 2.2 Ghz | 2× Intel Kaby Lake-U @ 2.8 Ghz | 2× ARM Cortex-A7 @ 1.0 Ghz | 1× ARM Cortex-A8 @ 1.0 Ghz | 4× ARM Cortex-A9 @ 1.0 Ghz | 1× ARM Cortex-A8 @ 1.0 Ghz |
| GPU | Mali-450 MP4 | - | Adreno 512 | Intel HD Gen9-LP Graphics | Mali-400 | OpenGL ES2.0, OpenVG 1.1 Mali 400 core | - | Mali-400 |
| RAM | 2.0 GiB | - | 3.0 GiB LPDDR4 | 16.0 GiB DDR4 | 1.0 GiB DDR3 | 1.0 GiB DDR3 | 4.0 GiB DDR3L | - |
| eMMC | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered |
| USB |
2 × host ports 1 of which support USB-OTG |
2 × host ports | 2 × host ports | 5 × host ports |
1 × host port 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
5 × host ports 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
| Ethernet |
1× 1 Gbps
|
1× 1 Gbps supports passive and active PoE
|
1× 1 Gbps wake on lan supported
|
1× 1 Gbps
|
1× 10/100
|
1× 1 Gbps
|
||
| Wi-Fi |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
- |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
- |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
- |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n |
| Bluetooth | onboard | - | onboard | - | - | - | - | onboard |
| Camera | up to 1 x inputs | - | up to 2 x inputs | - | - | - | - | up to 1 x inputs |
| Audio |
1 × outputs 1 × I2S |
1 × spdif-out 2 × I2S |
1 × outputs 1 × mic-in |
1 × outputs 1 × line-in 1 × mic-in |
1 × outputs | - | - |
1 × outputs 2 × mic-in 1 × spdif-out 1 × I2S |
| GPIO | 28 | 40 | - | 8 | 14 | 12 | 8 | 32 |
| PWM | 1 | 9 | - | - | 1 | 1 | - | 2 |
| ADC | - | 14 | - | - | 1 | 1 | - | - |
| I2C | 1 | 3 | 1 | 1 | - | - | - | 1 |
| SPI | 1 | 3 | 1 | - | - | - | - | 1 |
| UART | 1 | 7 | 1 | 2 | - | - | - | 2 |
| CAN | - | 3 | - | - | - | - | - | - |
| Pin header |
HAT (Raspberry Pi) |
Shield (Arduino) | - | - | Shield (Arduino) | Shield (Arduino) | - | - |
| Form factor | - | - | Pico-ITX | Pico-ITX | - | - | Pico-ITX | - |
| Dimensions | 148 mm x 100 mm x 18 mm | 36 mm x 18 mm | 100 mm x 72 mm | 100 mm x 72 mm x 18 mm | - | - | 100 mm x 72 mm | 45 mm x 30 mm x 3 mm |
| Temperature | - | - | 0.0°C - 70.0°C | 0.0°C - 60.0°C | - | - | -20.0°C - 70.0°C | - |
| Software |
Linux: True Android: 5.1 |
- |
Linux: True Android: 8+ |
Linux: True Windows: 10 |
Linux: True Android: 4.2 |
Linux: True Android: 4.2 |
Linux: True Android: 5.1 |
Linux: True |