Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
Sinovoip Banana Pi R2 vs. Teensy Teensy 4.0 vs. Inforce Inforce 6560 vs. Litemax APIX-KBL7 vs. LinkSprite pcDuino3B vs. LinkSprite pcDuino2 vs. DFI FS051 vs. Sinovoip Banana Pi Zero
Banana Pi R2 |
Teensy 4.0 |
Inforce 6560 |
APIX-KBL7 |
pcDuino3B |
pcDuino2 |
FS051 |
Banana Pi Zero |
|
| Manufacturer | Sinovoip | Teensy | Inforce | Litemax | LinkSprite | LinkSprite | DFI | Sinovoip |
| Price | $ 82.0 | $ 20.0 | $ 220.0 | - | $ 59.0 | $ 59.0 | - | - |
| SoC | MediaTek MT7623N | NXP i.MX RT1062 | Qualcomm Snapdragon 660 (SDA660) | Intel Core i7/i5/i3 and Celeron | AllWinner A20 | AllWinner A10 | NXP i.MX6 | AllWinner H2+ |
| CPU | 4× ARM Cortex-A7 @ 1.3 Ghz | 1× ARM Cortex-M7 @ 600 Mhz | 8× Qualcomm Kryo 260 @ 2.2 Ghz | 2× Intel Kaby Lake-U @ 2.8 Ghz | 2× ARM Cortex-A7 @ 1.0 Ghz | 1× ARM Cortex-A8 @ 1.0 Ghz | 4× ARM Cortex-A9 @ 1.0 Ghz | 4× ARM Cortex-A7 @ 1.0 Ghz |
| GPU | Mali-450 MP4 | - | Adreno 512 | Intel HD Gen9-LP Graphics | Mali-400 | OpenGL ES2.0, OpenVG 1.1 Mali 400 core | - | Mali-400 MP2 600MHz |
| RAM | 2.0 GiB | - | 3.0 GiB LPDDR4 | 16.0 GiB DDR4 | 1.0 GiB DDR3 | 1.0 GiB DDR3 | 4.0 GiB DDR3L | 1.0 GiB DDR3 |
| eMMC | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered |
| USB |
2 × host ports 1 of which support USB-OTG |
2 × host ports | 2 × host ports | 5 × host ports |
1 × host port 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
5 × host ports 1 of which support USB-OTG |
1 of which support USB-OTG |
| Ethernet |
1× 1 Gbps
|
1× 1 Gbps supports passive and active PoE
|
1× 1 Gbps wake on lan supported
|
1× 1 Gbps
|
1× 10/100
|
1× 1 Gbps
|
||
| Wi-Fi |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
- |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
- |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
- |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
| Bluetooth | onboard | - | onboard | - | - | - | - | - |
| Camera | up to 1 x inputs | - | up to 2 x inputs | - | - | - | - | up to 1 x inputs |
| Audio |
1 × outputs 1 × I2S |
1 × spdif-out 2 × I2S |
1 × outputs 1 × mic-in |
1 × outputs 1 × line-in 1 × mic-in |
1 × outputs | - | - | - |
| GPIO | 28 | 40 | - | 8 | 14 | 12 | 8 | 40 |
| PWM | 1 | 9 | - | - | 1 | 1 | - | 1 |
| ADC | - | 14 | - | - | 1 | 1 | - | - |
| I2C | 1 | 3 | 1 | 1 | - | - | - | 1 |
| SPI | 1 | 3 | 1 | - | - | - | - | 1 |
| UART | 1 | 7 | 1 | 2 | - | - | - | 1 |
| CAN | - | 3 | - | - | - | - | - | - |
| Pin header |
HAT (Raspberry Pi) |
Shield (Arduino) | - | - | Shield (Arduino) | Shield (Arduino) | - |
HAT (Raspberry Pi) |
| Form factor | - | - | Pico-ITX | Pico-ITX | - | - | Pico-ITX | Raspberry Pi Zero |
| Dimensions | 148 mm x 100 mm x 18 mm | 36 mm x 18 mm | 100 mm x 72 mm | 100 mm x 72 mm x 18 mm | - | - | 100 mm x 72 mm | 60 mm x 30 mm x 4 mm |
| Temperature | - | - | 0.0°C - 70.0°C | 0.0°C - 60.0°C | - | - | -20.0°C - 70.0°C | - |
| Software |
Linux: True Android: 5.1 |
- |
Linux: True Android: 8+ |
Linux: True Windows: 10 |
Linux: True Android: 4.2 |
Linux: True Android: 4.2 |
Linux: True Android: 5.1 |
Linux: True Android: 4.4 |