Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
Sinovoip Banana Pi R2 vs. Teensy Teensy 4.0 vs. Litemax APIX-KBL7 vs. LinkSprite pcDuino3B vs. Litemax AECX-V1K1 vs. Optimus Embedded Systems Prime vs. Next Thing Co. CHIP Pro vs. Congatec Conga-SMX8 vs. iWave Systems iW-Rainbow-G27S
Banana Pi R2 |
Teensy 4.0 |
APIX-KBL7 |
pcDuino3B |
AECX-V1K1 |
Prime |
CHIP Pro |
Conga-SMX8 |
iW-Rainbow-G27S |
|
| Manufacturer | Sinovoip | Teensy | Litemax | LinkSprite | Litemax | Optimus Embedded Systems | Next Thing Co. | Congatec | iWave Systems |
| Price | $ 82.0 | $ 20.0 | - | $ 59.0 | - | $ 125.0 | $ 16.0 | - | - |
| SoC | MediaTek MT7623N | NXP i.MX RT1062 | Intel Core i7/i5/i3 and Celeron | AllWinner A20 | AMD Ryzen Embedded V1000 | Rockchip RK3399 | AllWinner R8 (Next Thing GR8) | NXP i.MX8 DualMax, QuadPlus, or QuadMax | NXP i.MX8 Quad MAX/Quad Plus |
| CPU | 4× ARM Cortex-A7 @ 1.3 Ghz | 1× ARM Cortex-M7 @ 600 Mhz | 2× Intel Kaby Lake-U @ 2.8 Ghz | 2× ARM Cortex-A7 @ 1.0 Ghz | 4× x86 @ 3.35 Ghz |
2× ARM Cortex-A72 @ 2.0 Ghz 4× ARM Cortex-A53 @ 1.5 Ghz |
1× ARM Cortex-A8 @ 1.0 Ghz | 4× ARM 1x or 2x ARM Cortex-A72 cores, plus 0x or 4x Cortex-A53 cores @ 1.5 Ghz | 4× ARM Cortex-A53 @ 1.2 Ghz |
| GPU | Mali-450 MP4 | - | Intel HD Gen9-LP Graphics | Mali-400 | AMD VEGA | Mali-T860 MP4 | Mali-400 | 2x GT7000 | GC7000XSVX |
| RAM | 2.0 GiB | - | 16.0 GiB DDR4 | 1.0 GiB DDR3 | 4.0 GiB DDR4 | - | 8.0 GiB LPDDR4 | 4.0 GiB LPDDR4 | |
| eMMC | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | - | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered |
| USB |
2 × host ports 1 of which support USB-OTG |
2 × host ports | 5 × host ports |
1 × host port 1 of which support USB-OTG |
5 × host ports |
2 × host ports 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
6 × host ports 1 of which support USB-OTG |
3 × host ports 1 of which support USB-OTG |
| Ethernet |
1× 1 Gbps
|
1× 1 Gbps wake on lan supported
|
1× 1 Gbps
|
1× 1 Gbps wake on lan supported
|
1× 1 Gbps wake on lan supported
|
1× 1 Gbps
|
1× 1 Gbps wake on lan supported
|
||
| Wi-Fi |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
- | - |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
- |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n |
On-board Wi-Fi without external antenna |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
| Bluetooth | onboard | - | - | - | - | onboard | onboard | onboard | onboard |
| Modem | - | - | - | - | - | onboard | - | - | onboard |
| Camera | up to 1 x inputs | - | - | - | - | up to 3 x inputs | up to 1 x inputs | up to 2 x inputs | up to 2 x inputs |
| Audio |
1 × outputs 1 × I2S |
1 × spdif-out 2 × I2S |
1 × outputs 1 × line-in 1 × mic-in |
1 × outputs |
1 × line-in |
1 × outputs 1 × line-in 1 × mic-in 1 × I2S |
1 × outputs 2 × mic-in 1 × spdif-out 1 × I2S |
2 × I2S |
1 × outputs 1 × mic-in 1 × spdif-out 1 × I2S |
| GPIO | 28 | 40 | 8 | 14 | 8 | 40 | 32 | - | 15 |
| PWM | 1 | 9 | - | 1 | - | - | 2 | - | 4 |
| ADC | - | 14 | - | 1 | - | - | - | - | - |
| I2C | 1 | 3 | 1 | - | - | 2 | 1 | 1 | 3 |
| SPI | 1 | 3 | - | - | - | 2 | 1 | 1 | 2 |
| UART | 1 | 7 | 2 | - | 1 | 1 | 2 | 4 | 4 |
| CAN | - | 3 | - | - | - | - | - | 3 | 1 |
| Pin header |
HAT (Raspberry Pi) |
Shield (Arduino) | - | Shield (Arduino) | - |
HAT (Raspberry Pi) |
- | - | - |
| Form factor | - | - | Pico-ITX | - | - | - | - | - | Pico-ITX |
| Dimensions | 148 mm x 100 mm x 18 mm | 36 mm x 18 mm | 100 mm x 72 mm x 18 mm | - | 146 mm x 102 mm | 65 mm x 85 mm x 2 mm | 45 mm x 30 mm x 3 mm | 82 mm x 50 mm | 100 mm x 72 mm |
| Temperature | - | - | 0.0°C - 60.0°C | - | 0.0°C - 60.0°C | -40.0°C - 85.0°C | - | 0.0°C - 60.0°C | -40.0°C - 85.0°C |
| Software |
Linux: True Android: 5.1 |
- |
Linux: True Windows: 10 |
Linux: True Android: 4.2 |
Linux: True (mainline) Windows: 10 |
Linux: True Android: Android Windows: Embedded ARM |
Linux: True |
Linux: True Android: yes |
Linux: True Android: 9.0 |