Board-DB logo

Board Technical Specifications Comparison

Add boards using the dropdown below, and compare their specs side by side.

Teensy Teensy 4.0 vs. Inforce Inforce 6560 vs. LinkSprite pcDuino3B vs. DFI FS051 vs. Next Thing Co. CHIP Pro

×

Teensy 4.0
×

Inforce 6560
×

pcDuino3B
×

FS051
×

CHIP Pro
Manufacturer Teensy Inforce LinkSprite DFI Next Thing Co.
Price $ 20.0 $ 220.0 $ 59.0 - $ 16.0
SoC NXP i.MX RT1062 Qualcomm Snapdragon 660 (SDA660) AllWinner A20 NXP i.MX6 AllWinner R8 (Next Thing GR8)
CPU 1× ARM Cortex-M7 @ 600 Mhz 8× Qualcomm Kryo 260 @ 2.2 Ghz 2× ARM Cortex-A7 @ 1.0 Ghz 4× ARM Cortex-A9 @ 1.0 Ghz 1× ARM Cortex-A8 @ 1.0 Ghz
GPU - Adreno 512 Mali-400 - Mali-400
RAM - 3.0 GiB LPDDR4 1.0 GiB DDR3 4.0 GiB DDR3L -
eMMC 1 × soldered 1 × soldered 1 × soldered 1 × soldered 1 × soldered
USB 2 × host ports 2 × host ports 1 × host port
1 of which support USB-OTG 		5 × host ports
1 of which support USB-OTG 		1 × host port
1 of which support USB-OTG
Ethernet
1× 1 Gbps
supports passive and active PoE
1× 1 Gbps
1× 1 Gbps
Wi-Fi - On-board Wi-Fi without external antenna
2.4Ghz b/g/n
5Ghz a/n/ac 		On-board Wi-Fi without external antenna
2.4Ghz b/g/n 		- On-board Wi-Fi with external antenna
2.4Ghz b/g/n
Bluetooth - onboard - - onboard
Camera - up to 2 x inputs - - up to 1 x inputs
Audio
1 × spdif-out
2 × I2S 		1 × outputs
1 × mic-in 		1 × outputs - 1 × outputs
2 × mic-in
1 × spdif-out
1 × I2S
GPIO 40 - 14 8 32
PWM 9 - 1 - 2
ADC 14 - 1 - -
I2C 3 1 - - 1
SPI 3 1 - - 1
UART 7 1 - - 2
CAN 3 - - - -
Pin header Shield (Arduino) - Shield (Arduino) - -
Form factor - Pico-ITX - Pico-ITX -
Dimensions 36 mm x 18 mm 100 mm x 72 mm - 100 mm x 72 mm 45 mm x 30 mm x 3 mm
Temperature - 0.0°C - 70.0°C - -20.0°C - 70.0°C -
Software - Linux: True
Android: 8+ 		Linux: True
Android: 4.2 		Linux: True
Android: 5.1 		Linux: True