Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
Teensy Teensy 4.0 vs. Inforce Inforce 6560 vs. Next Thing Co. CHIP Pro
Teensy 4.0 |
Inforce 6560 |
CHIP Pro |
|
| Manufacturer | Teensy | Inforce | Next Thing Co. |
| Price | $ 20.0 | $ 220.0 | $ 16.0 |
| SoC | NXP i.MX RT1062 | Qualcomm Snapdragon 660 (SDA660) | AllWinner R8 (Next Thing GR8) |
| CPU | 1× ARM Cortex-M7 @ 600 Mhz | 8× Qualcomm Kryo 260 @ 2.2 Ghz | 1× ARM Cortex-A8 @ 1.0 Ghz |
| GPU | - | Adreno 512 | Mali-400 |
| RAM | - | 3.0 GiB LPDDR4 | - |
| eMMC | 1 × soldered | 1 × soldered | 1 × soldered |
| USB | 2 × host ports | 2 × host ports |
1 × host port 1 of which support USB-OTG |
| Ethernet |
1× 1 Gbps supports passive and active PoE
|
||
| Wi-Fi | - |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n |
| Bluetooth | - | onboard | onboard |
| Camera | - | up to 2 x inputs | up to 1 x inputs |
| Audio |
1 × spdif-out 2 × I2S |
1 × outputs 1 × mic-in |
1 × outputs 2 × mic-in 1 × spdif-out 1 × I2S |
| GPIO | 40 | - | 32 |
| PWM | 9 | - | 2 |
| ADC | 14 | - | - |
| I2C | 3 | 1 | 1 |
| SPI | 3 | 1 | 1 |
| UART | 7 | 1 | 2 |
| CAN | 3 | - | - |
| Pin header | Shield (Arduino) | - | - |
| Form factor | - | Pico-ITX | - |
| Dimensions | 36 mm x 18 mm | 100 mm x 72 mm | 45 mm x 30 mm x 3 mm |
| Temperature | - | 0.0°C - 70.0°C | - |
| Software | - |
Linux: True Android: 8+ |
Linux: True |