Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
Teensy Teensy 4.0 vs. LinkSprite pcDuino3B vs. LinkSprite pcDuino2 vs. CubieTech Cubieboard A10 vs. DFI FS051 vs. Next Thing Co. CHIP Pro vs. Sinovoip Banana Pi Zero
Teensy 4.0 |
pcDuino3B |
pcDuino2 |
Cubieboard A10 |
FS051 |
CHIP Pro |
Banana Pi Zero |
|
| Manufacturer | Teensy | LinkSprite | LinkSprite | CubieTech | DFI | Next Thing Co. | Sinovoip |
| Price | $ 20.0 | $ 59.0 | $ 59.0 | $ 49.0 | - | $ 16.0 | - |
| SoC | NXP i.MX RT1062 | AllWinner A20 | AllWinner A10 | AllWinner A10 | NXP i.MX6 | AllWinner R8 (Next Thing GR8) | AllWinner H2+ |
| CPU | 1× ARM Cortex-M7 @ 600 Mhz | 2× ARM Cortex-A7 @ 1.0 Ghz | 1× ARM Cortex-A8 @ 1.0 Ghz | 1× ARM Cortex-A8 @ 1.2 Ghz | 4× ARM Cortex-A9 @ 1.0 Ghz | 1× ARM Cortex-A8 @ 1.0 Ghz | 4× ARM Cortex-A7 @ 1.0 Ghz |
| GPU | - | Mali-400 | OpenGL ES2.0, OpenVG 1.1 Mali 400 core | Mali-400 | - | Mali-400 | Mali-400 MP2 600MHz |
| RAM | - | 1.0 GiB DDR3 | 1.0 GiB DDR3 | 1.0 GiB DDR3 | 4.0 GiB DDR3L | - | 1.0 GiB DDR3 |
| eMMC | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered |
| USB | 2 × host ports |
1 × host port 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
2 × host ports 1 of which support USB-OTG |
5 × host ports 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
1 of which support USB-OTG |
| Ethernet |
1× 1 Gbps
|
1× 10/100
|
1× 10/100
|
1× 1 Gbps
|
|||
| Wi-Fi | - |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
- | - |
On-board Wi-Fi with external antenna 2.4Ghz b/g/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
| Bluetooth | - | - | - | - | - | onboard | - |
| Camera | - | - | - | up to 1 x inputs | - | up to 1 x inputs | up to 1 x inputs |
| Audio |
1 × spdif-out 2 × I2S |
1 × outputs | - |
1 × outputs 1 × line-in |
- |
1 × outputs 2 × mic-in 1 × spdif-out 1 × I2S |
- |
| GPIO | 40 | 14 | 12 | 96 | 8 | 32 | 40 |
| PWM | 9 | 1 | 1 | - | - | 2 | 1 |
| ADC | 14 | 1 | 1 | 1 | - | - | - |
| I2C | 3 | - | - | - | - | 1 | 1 |
| SPI | 3 | - | - | - | - | 1 | 1 |
| UART | 7 | - | - | - | - | 2 | 1 |
| CAN | 3 | - | - | - | - | - | - |
| Pin header | Shield (Arduino) | Shield (Arduino) | Shield (Arduino) | - | - | - |
HAT (Raspberry Pi) |
| Form factor | - | - | - | - | Pico-ITX | - | Raspberry Pi Zero |
| Dimensions | 36 mm x 18 mm | - | - | - | 100 mm x 72 mm | 45 mm x 30 mm x 3 mm | 60 mm x 30 mm x 4 mm |
| Temperature | - | - | - | - | -20.0°C - 70.0°C | - | - |
| Software | - |
Linux: True Android: 4.2 |
Linux: True Android: 4.2 |
Linux: True Android: 4.2 |
Linux: True Android: 5.1 |
Linux: True |
Linux: True Android: 4.4 |