Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
Xunlong Software Orange Pi Prime vs. Raspberry Pi Foundation Raspberry Pi Zero W (Wireless) vs. Radxa Rock Pi 4 vs. Teensy Teensy 4.0 vs. Ibase IBR210 vs. BeagleBoard.org BeagleBone AI
![]() Orange Pi Prime |
![]() Raspberry Pi Zero W (Wireless) |
![]() Rock Pi 4 |
![]() Teensy 4.0 |
![]() IBR210 |
![]() BeagleBone AI |
|
Manufacturer | Xunlong Software | Raspberry Pi Foundation | Radxa | Teensy | Ibase | BeagleBoard.org |
Price | $ 30.0 | $ 10.0 | $ 75.0 | $ 20.0 | $ 266.0 | $ 118.0 |
SoC | AllWinner H5 | Broadcom BCM2835 | Rockchip RK3399 | NXP i.MX RT1062 | NXP i.MX8 M Quad, Dual | TI AM5729 |
CPU | 4× ARM Cortex-A53 @ 1.2 Ghz | 1× ARM1176JZF-S @ 1.0 Ghz |
2× ARM Cortex-A72 @ 2.0 Ghz 4× ARM Cortex-A53 @ 1.5 Ghz |
1× ARM Cortex-M7 @ 600 Mhz | 4× ARM Cortex-A53 @ 1.5 Ghz | 2× ARM Cortex-A15 @ 1.5 Ghz |
GPU | Mali-450 | VideoCore IV | Mali-T860 MP4 | - | Vivante GC7000Lite | 2x SGX544 (2D); 2x GC320 (2D); 4x EVE cores |
RAM | 2.0 GiB DDR3 | 1.0 GiB DDR3 | 4.0 GiB LPDDR4 | - | 3.0 GiB LPDDR4 | 1.0 GiB |
eMMC | 1 × soldered | - | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered |
SD | - | 1 × bootable: True | - | - | - | - |
USB |
3 × host ports 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
4 × host ports 1 of which support USB-OTG |
2 × host ports |
4 × host ports 1 of which support USB-OTG |
1 × host port 1 of which support USB-OTG |
Ethernet |
1× 1 Gbps
|
1× 1 Gbps supports passive and active PoE
|
1× 1 Gbps
|
1× 1 Gbps
|
||
Wi-Fi |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
- | On-board Wi-Fi without external antenna |
On-board Wi-Fi without external antenna 2.4Ghz b/g/n 5Ghz a/n/ac |
Bluetooth | onboard | onboard | onboard | - | onboard | onboard |
Modem | - | - | - | - | onboard | - |
Camera | up to 1 x inputs | up to 1 x inputs | up to 1 x inputs | - | up to 2 x inputs | - |
Audio |
1 × outputs 1 × I2S |
1 × outputs 1 × I2S |
1 × outputs 1 × mic-in 1 × I2S |
1 × spdif-out 2 × I2S |
1 × outputs 1 × line-in 1 × mic-in 1 × I2S |
- |
GPIO | 40 | 40 | 40 | 40 | 8 | 65 |
PWM | 1 | 2 | 2 | 9 | - | - |
ADC | - | - | 1 | 14 | - | - |
I2C | 1 | 1 | 2 | 3 | 1 | 2 |
SPI | 1 | 1 | 1 | 3 | - | 1 |
UART | 2 | 1 | 2 | 7 | 3 | 5 |
CAN | - | - | - | 3 | - | - |
Pin header |
HAT (Raspberry Pi) |
HAT (Raspberry Pi) |
HAT (Raspberry Pi) |
Shield (Arduino) | - | - |
Form factor | - | Raspberry Pi Zero | - | - | - | - |
Dimensions | 98 mm x 60 mm x 13 mm | 65 mm x 30 mm x 5 mm | 85 mm x 54 mm x 20 mm | 36 mm x 18 mm | 147 mm x 102 mm | 86 mm x 53 mm |
Temperature | -10.0°C - 65.0°C | 0.0°C - 50.0°C | 0.0°C - 80.0°C | - | 0.0°C - 70.0°C | 0.0°C - 70.0°C |
Software |
Linux: True Android: 4.4 |
Linux: True (mainline) |
Linux: True Android: 7.1, 9.0 |
- |
Linux: True Android: 9 |
Linux: True Android: (tbd) |