Board Technical Specifications Comparison
Add boards using the dropdown below, and compare their specs side by side.
GreenWaves GAPuino GAP8 vs. Roseapple Pi Roseapple Pi vs. Octavo Systems OSD32MP15x SiP vs. Firefly Core-3399Pro-JD4 vs. Calao SMC-NTKE1 vs. ST Microelectronics STM32F7 6G Discovery
GAPuino GAP8 |
Roseapple Pi |
OSD32MP15x SiP |
Core-3399Pro-JD4 |
SMC-NTKE1 |
STM32F7 6G Discovery |
|
| Manufacturer | GreenWaves | Roseapple Pi | Octavo Systems | Firefly | Calao | ST Microelectronics |
| Price | $ 110.0 | - | - | $ 119.0 | - | $ 54.0 |
| SoC | GreenWaves GAP8 | Actions Semi S500 | STMicroelectronics STM32MP15x | Rockchip RK3399Pro | Nvidia Tegra K1 | STM32 STM32F746NG |
| CPU | 8× RISC-V @ 250 Mhz | 4× ARM Cortex-A9 @ 1.3 Ghz | 2× ARM Cortex-A7 @ 650 Mhz |
2× ARM Cortex-A72 @ 1.8 Ghz 4× ARM Cortex-A53 @ 1.4 Ghz |
4× ARM Cortex-A15 @ 2.3 Ghz | 1× ARM Cortex-M7 @ 220 Mhz |
| GPU | - | PowerVR SGX544 | Vivante (3D GPU; OpenGL ES 2.0) | ARM Mali-T860 MP4 | 192-core Mobile Kepler | - |
| RAM | - | 2.0 GiB | 1.0 GiB DDR3L | 6.0 GiB DDR3L | 2.0 GiB | - |
| eMMC | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered | 1 × soldered |
| USB | - | 3 × host ports |
3 × host ports 3 of which support USB-OTG |
2 × host ports 1 of which are Type-C 1 of which support USB-OTG |
2 × host ports 1 of which support USB-OTG |
1 × host port 2 of which support USB-OTG |
| Ethernet |
1× 10/100
|
1× 1 Gbps
|
1× 1 Gbps
|
1× 1 Gbps
|
1× 10/100
|
|
| Wi-Fi | - | On-board Wi-Fi without external antenna | - | - | - | - |
| Camera | up to 1 x inputs | up to 1 x inputs | up to 1 x inputs | up to 2 x inputs | up to 2 x inputs | - |
| Audio | - |
1 × outputs 1 × mic-in 1 × I2S |
1 × outputs 4 × spdif-out 3 × I2S |
1 × outputs 1 × line-in 1 × mic-in 1 × spdif-out 1 × I2S |
1 × spdif-out 1 × I2S |
1 × outputs 1 × line-in 2 × mic-in 1 × spdif-out |
| GPIO | 14 | 16 | 148 | - | 12 | 168 |
| PWM | 4 | - | 2 | 3 | - | - |
| ADC | - | - | 2 | 4 | - | 3 |
| I2C | 1 | 1 | 6 | 9 | 3 | 4 |
| SPI | - | 1 | 6 | 5 | 2 | 6 |
| UART | 1 | 1 | 4 | 5 | 4 | 8 |
| CAN | - | - | 2 | - | - | 2 |
| Pin header | Shield (Arduino) |
HAT (Raspberry Pi) |
- | - | - | Shield (Arduino) |
| Dimensions | 180 mm x 100 mm x 50 mm | 85 mm x 56 mm x 15 mm | 18 mm x 18 mm | 85 mm x 70 mm | 82 mm x 50 mm x 5 mm | 130 mm x 80 mm |
| Temperature | - | - | -40.0°C - 85.0°C | - | -25.0°C - 85.0°C | - |
| Software | - |
Linux: True Android: 5.1 |
Linux: True |
Linux: True Android: Android |
Linux: True | - |